lkml.org 
[lkml]   [2020]   [Jan]   [9]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 34/36] platform/x86: intel_pmc_ipc: Convert to MFD
On Thu, Jan 09, 2020 at 01:43:54PM +0200, Andy Shevchenko wrote:
> On Wed, Jan 08, 2020 at 02:41:59PM +0300, Mika Westerberg wrote:
> > This driver only creates a bunch of platform devices sharing resources
> > belonging to the PMC device. This is pretty much what MFD subsystem is
> > for so move the driver there, renaming it to intel_pmc_bxt.c which
> > should be more clear what it is.
> >
> > MFD subsystem provides nice helper APIs for subdevice creation so
> > convert the driver to use those. Unfortunately the ACPI device includes
> > separate resources for most of the subdevices so we cannot simply call
> > mfd_add_devices() to create all of them but instead we need to call it
> > separately for each device.
>
> Comments below, after addressing,
> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Thanks!

> > Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
> > ---
> > drivers/mfd/Kconfig | 14 +-
> > drivers/mfd/Makefile | 1 +
> > .../intel_pmc_ipc.c => mfd/intel_pmc_bxt.c} | 394 +++++++-----------
> > drivers/platform/x86/Kconfig | 16 +-
> > drivers/platform/x86/Makefile | 1 -
> > .../platform/x86/intel_telemetry_debugfs.c | 2 +-
> > drivers/usb/typec/tcpm/Kconfig | 2 +-
> > .../linux/mfd/intel_pmc_bxt.h | 11 +-
> > 8 files changed, 171 insertions(+), 270 deletions(-)
> > rename drivers/{platform/x86/intel_pmc_ipc.c => mfd/intel_pmc_bxt.c} (50%)
> > rename arch/x86/include/asm/intel_pmc_ipc.h => include/linux/mfd/intel_pmc_bxt.h (83%)
> >
> > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> > index 59515142438e..04542feffe25 100644
> > --- a/drivers/mfd/Kconfig
> > +++ b/drivers/mfd/Kconfig
> > @@ -551,7 +551,7 @@ config INTEL_SOC_PMIC
> >
> > config INTEL_SOC_PMIC_BXTWC
> > tristate "Support for Intel Broxton Whiskey Cove PMIC"
> > - depends on INTEL_PMC_IPC
> > + depends on MFD_INTEL_PMC_BXT
> > select MFD_CORE
> > select REGMAP_IRQ
> > help
> > @@ -632,6 +632,18 @@ config MFD_INTEL_MSIC
> > Passage) chip. This chip embeds audio, battery, GPIO, etc.
> > devices used in Intel Medfield platforms.
> >
> > +config MFD_INTEL_PMC_BXT
> > + tristate "Intel PMC Driver for Broxton"
>
> > + depends on X86 && X86_PLATFORM_DEVICES && ACPI
>
> Is the X86_PLATFORM_DEVICES dependency compulsory?
> Quick grep shows that none of drivers (except nouveau) relies on it.

Well, we need that to be able to do the "select INTEL_SCU_IPC" below.
I'm happy to change it if you have a better alternative ;-)

> For the rest two I think we might split one per line to be consistent with
> existing example(s) in drivers/mfd/Kconfig.

OK

>
> > + select INTEL_SCU_IPC
> > + select MFD_CORE
> > + help
> > + This driver provides support for PMC (Power Management
> > + Controller) on Intel Broxton and Apollo Lake. PMC is a
> > + multi-function device that exposes IPC, General Control
> > + Register and P-unit access. In addition this creates devices
> > + for iTCO watchdog and telemetry that are part of the PMC.

\
 
 \ /
  Last update: 2020-01-09 12:49    [W:0.079 / U:2.564 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site