lkml.org 
[lkml]   [2020]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
SubjectRe: [PATCH v1] driver core: Use list_del_init to replace list_del at device_links_purge()
From
Date
On Wed, 2020-01-08 at 16:57 +0100, Greg KH wrote:
> On Wed, Jan 08, 2020 at 07:51:35AM -0800, James Bottomley wrote:
> > On Wed, 2020-01-08 at 14:50 +0000, John Garry wrote:
> > > On 08/01/2020 12:26, Greg KH wrote:
> > > > On Wed, Jan 08, 2020 at 07:34:04PM +0800, Luo Jiaxing wrote:
> > > > > We found that enabling kernel compilation options
> > > > > CONFIG_SCSI_ENCLOSURE and
> > > > > CONFIG_ENCLOSURE_SERVICES, repeated initialization and
> > > > > deletion
> > > > > of the same
> > > > > SCSI device will cause system panic, as follows:
> > > > > [72.425705] Unable to handle kernel paging request at virtual
> > > > > address
> > > > > dead000000000108
> > > > > ...
> > > > > [72.595093] Call trace:
> > > > > [72.597532] device_del + 0x194 / 0x3a0
> > > > > [72.601012] enclosure_remove_device + 0xbc / 0xf8
> > > > > [72.605445] ses_intf_remove + 0x9c / 0xd8
> > > > > [72.609185] device_del + 0xf8 / 0x3a0
> > > > > [72.612576] device_unregister + 0x14 / 0x30
> > > > > [72.616489] __scsi_remove_device + 0xf4 / 0x140
> > > > > [72.620747] scsi_remove_device + 0x28 / 0x40
> > > > > [72.624745] scsi_remove_target + 0x1c8 / 0x220
> > > > >
> > > > > After analysis, we see that in the error scenario, the ses
> > > > > module
> > > > > has the
> > > > > following calling sequence:
> > > > > device_register() -> device_del() -> device_add() ->
> > > > > device_del().
> > > > > The first call to device_del() is fine, but the second call
> > > > > to
> > > > > device_del()
> > > > > will cause a system panic.
> > > >
> > > > Is this all on the same device structure? If so, that's not
> > > > ok,
> > > > you
> > > > can't do that, once device_del() is called on the memory
> > > > location,
> > > > you
> > > > can not call device_add() on it again.
> > > >
> > > > How are you triggering this from userspace?
> > >
> > > This can be triggered by causing the SCSI device to be lost,
> > > found,
> > > and
> > > lost again:
> > >
> > > root@(none)$ pwd
> > > /sys/class/sas_phy/phy-0:0:2
> > > root@(none)$ echo 0 > enable
> > > [ 48.828139] sas: smp_execute_task_sg: task to dev
> > > 500e004aaaaaaa1f
> > > response: 0x0 status 0x2
> > > root@(none)$
> > > [ 48.837040] sas: ex 500e004aaaaaaa1f phy02 change count has
> > > changed
> > > [ 48.846961] sd 0:0:0:0: [sda] Synchronizing SCSI cache
> > > [ 48.852120] sd 0:0:0:0: [sda] Synchronize Cache(10) failed:
> > > Result:
> > > hostbyte=0x04 driverbyte=0x00
> > > [ 48.898111] hisi_sas_v3_hw 0000:74:02.0: dev[2:1] is gone
> > >
> > > root@(none)$ echo 1 > enable
> > > root@(none)$
> > > [ 51.967416] sas: ex 500e004aaaaaaa1f phy02 change count has
> > > changed
> > > [ 51.974022] hisi_sas_v3_hw 0000:74:02.0: dev[7:1] found
> > > [ 51.991305] scsi 0:0:5:0: Direct-
> > > Access SEAGATE ST2000NM0045
> > > N004 PQ: 0 ANSI: 6
> > > [ 52.003609] sd 0:0:5:0: [sda] 3907029168 512-byte logical
> > > blocks:
> > > (2.00 TB/1.82 TiB)
> > > [ 52.012010] sd 0:0:5:0: [sda] Write Protect is off
> > > [ 52.022643] sd 0:0:5:0: [sda] Write cache: enabled, read
> > > cache:
> > > enabled, supports DPO and FUA
> > > [ 52.052429] sda: sda1
> > > [ 52.064439] sd 0:0:5:0: [sda] Attached SCSI disk
> > >
> > > root@(none)$ echo 0 > enable
> > > [ 54.112100] sas: smp_execute_task_sg: task to dev
> > > 500e004aaaaaaa1f
> > > response: 0x0 status 0x2
> > > root@(none)$ [ 54.120909] sas: ex 500e004aaaaaaa1f phy02 change
> > > count
> > > has changed
> > > [ 54.130202] Unable to handle kernel paging request at virtual
> > > address
> > > dead000000000108
> > > [ 54.138110] Mem abort info:
> > > [ 54.140892] ESR = 0x96000044
> > > [ 54.143936] EC = 0x25: DABT (current EL), IL = 32 bits
> > > [ 54.149236] SET = 0, FnV = 0
> > > [ 54.152278] EA = 0, S1PTW = 0
> > > [ 54.155408] Data abort info:
> > > [ 54.158275] ISV = 0, ISS = 0x00000044
> > > [ 54.162098] CM = 0, WnR = 1
> > > [ 54.165055] [dead000000000108] address between user and
> > > kernel
> > > address ranges
> > > [ 54.172179] Internal error: Oops: 96000044 [#1] PREEMPT SMP
> > > [ 54.177737] Modules linked in:
> > > [ 54.180780] CPU: 5 PID: 741 Comm: kworker/u192:2 Not tainted
> > > 5.5.0-rc5-dirty #1535
> > > [ 54.188334] Hardware name: Huawei D06 /D06, BIOS Hisilicon D06
> > > UEFI
> > > RC0 - V1.16.01 03/15/2019
> > > [ 54.196847] Workqueue: 0000:74:02.0_disco_q
> > > sas_revalidate_domain
> > > [ 54.202927] pstate: 60c00009 (nZCv daif +PAN +UAO)
> > > [ 54.207705] pc : device_del+0x194/0x398
> > > [ 54.211527] lr : device_del+0x190/0x398
> > > [ 54.215349] sp : ffff80001cc7bb20
> > > [ 54.218650] x29: ffff80001cc7bb20 x28: ffff0023be042188
> > > [ 54.223948] x27: ffff0023c04c0000 x26: ffff0023be042000
> > > [ 54.229246] x25: ffff8000119f0f30 x24: ffff0023be268a30
> > > [ 54.234544] x23: ffff0023be268018 x22: ffff800011879000
> > > [ 54.239842] x21: ffff8000119f0000 x20: ffff8000119f06e0
> > > [ 54.245140] x19: ffff0023be268990 x18: 0000000000000004
> > > [ 54.250438] x17: 0000000000000007 x16: 0000000000000001
> > > [ 54.255736] x15: ffff0023eac13610 x14: ffff0023eb74a7f8
> > > [ 54.261034] x13: 0000000000000000 x12: ffff0023eac13610
> > > [ 54.266332] x11: ffff0023eb74a6c8 x10: 0000000000000000
> > > [ 54.271630] x9 : ffff0023eac13618 x8 : 0000000040040000
> > > [ 54.276928] x7 : 0000000000000000 x6 : ffff0023be268a90
> > > [ 54.282226] x5 : ffff0023be74aa00 x4 : 0000000000000000
> > > [ 54.287524] x3 : ffff8000119f0f30 x2 : dead000000000100
> > > [ 54.292821] x1 : dead000000000122 x0 : 0000000000000000
> > > [ 54.298119] Call trace:
> > > [ 54.300553] device_del+0x194/0x398
> > > [ 54.304030] enclosure_remove_device+0xb4/0x100
> > > [ 54.308548] ses_intf_remove+0x98/0xd8
> > > [ 54.312283] device_del+0xfc/0x398
> > > [ 54.315671] device_unregister+0x14/0x30
> > > [ 54.319580] __scsi_remove_device+0xf0/0x130
> > > [ 54.323836] scsi_remove_device+0x28/0x40
> > > [ 54.327832] scsi_remove_target+0x1bc/0x250
> > > [ 54.332002] sas_rphy_remove+0x5c/0x60
> > > [ 54.335738] sas_rphy_delete+0x14/0x28
> > > [ 54.339473] sas_destruct_devices+0x5c/0x98
> > > [ 54.343642] sas_revalidate_domain+0xa0/0x178
> > > [ 54.347986] process_one_work+0x1e0/0x358
> > > [ 54.351982] worker_thread+0x40/0x488
> > > [ 54.355631] kthread+0x118/0x120
> > > [ 54.358846] ret_from_fork+0x10/0x18
> > > [ 54.362410] Code: 91028278 aa1903e0 9415f01f a94c0662
> > > (f9000441)
> > > [ 54.368489] ---[ end trace 38c672fcf89c95f7 ]---
> > >
> > > I tested on v5.4 and no such issue, but maybe the driver core
> > > changes
> > > have exposed a ses/enclosure issue.
> > >
> > > Checking:
> > >
> > > int enclosure_remove_device(struct enclosure_device *edev, struct
> > > device
> > > *dev)
> > > {
> > > struct enclosure_component *cdev;
> > > int i;
> > >
> > > if (!edev || !dev)
> > > return -EINVAL;
> > >
> > > for (i = 0; i < edev->components; i++) {
> > > cdev = &edev->component[i];
> > > if (cdev->dev == dev) {
> > > enclosure_remove_links(cdev);
> > > device_del(&cdev->cdev);
> > > put_device(dev);
> > > cdev->dev = NULL;
> > > return device_add(&cdev->cdev);
> > > }
> > > }
> > > return -ENODEV;
> > > }
> >
> > The design of the code is simply to remove the link to the inserted
> > device which has been removed.
> >
> > I *think* this means the calls to device_del and device_add are
> > unnecessary and should go. enclosure_remove_links and the put of
> > the
> > enclosed device should be sufficient.
>
> That would make more sense than trying to "reuse" the device
> structure
> here by tearing it down and adding it back.

OK, let's try that. This should be the patch if someone can try it
(I've compile tested it, but the enclosure system is under a heap of
stuff in the garage).

James

---

diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 6d27ccfe0680..3c2d405bc79b 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -406,10 +406,9 @@ int enclosure_remove_device(struct enclosure_device *edev, struct device *dev)
cdev = &edev->component[i];
if (cdev->dev == dev) {
enclosure_remove_links(cdev);
- device_del(&cdev->cdev);
put_device(dev);
cdev->dev = NULL;
- return device_add(&cdev->cdev);
+ return 0;
}
}
return -ENODEV;
\
 
 \ /
  Last update: 2020-01-08 17:04    [W:0.048 / U:29.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site