lkml.org 
[lkml]   [2020]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/5] media: hantro: Reduce H264 extra space for motion vectors
From
Date
On 2020-01-08 13:59, Tomasz Figa wrote:
> On Tue, Dec 10, 2019 at 3:11 AM Ezequiel Garcia <ezequiel@collabora.com> wrote:
>>
>> On Wed, 2019-11-20 at 21:44 +0900, Tomasz Figa wrote:
>>> Hi Jonas,
>>>
>>> On Thu, Nov 7, 2019 at 7:34 AM Jonas Karlman <jonas@kwiboo.se> wrote:
>>>> A decoded 8-bit 4:2:0 frame need memory for up to 448 bytes per
>>>> macroblock with additional 32 bytes on multi-core variants.
>>>>
>>>> Memory layout is as follow:
>>>>
>>>> +---------------------------+
>>>>> Y-plane 256 bytes x MBs |
>>>> +---------------------------+
>>>>> UV-plane 128 bytes x MBs |
>>>> +---------------------------+
>>>>> MV buffer 64 bytes x MBs |
>>>> +---------------------------+
>>>>> MC sync 32 bytes |
>>>> +---------------------------+
>>>>
>>>> Reduce the extra space allocated now that motion vector buffer offset no
>>>> longer is based on the extra space.
>>>>
>>>> Only allocate extra space for 64 bytes x MBs of motion vector buffer
>>>> and 32 bytes for multi-core sync.
>>>>
>>>> Fixes: a9471e25629b ("media: hantro: Add core bits to support H264 decoding")
>>>> Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
>>>> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
>>>> ---
>>>> Changes in v3:
>>>> - add memory layout to code comment (Boris)
>>>> Changes in v2:
>>>> - updated commit message
>>>> ---
>>>> drivers/staging/media/hantro/hantro_v4l2.c | 20 ++++++++++++++++++--
>>>> 1 file changed, 18 insertions(+), 2 deletions(-)
>>>>
>>>
>>> Thanks for the patch!
>>>
>>> What platform did you test it on and how? Was it tested with IOMMU enabled?
>>
>> Hello Tomasz,
>>
>> Please note that this series has been picked-up and is merged
>> in v5.5-rc1.
>>
>> IIRC, we tested these patches on RK3399 and RK3288 (that means
>> with an IOMMU). I've just ran some more extensive tests on RK3288,
>> on media/master; and I plan to test some more on RK3399 later this week.
>>
>> Do you have any specific concern in mind?
>
> I specifically want to know whether we're 100% sure that those sizes
> are correct. The IOMMU still works on page granularity so it's
> possible that the allocation could be just big enough by luck.

One of my RK3288 TRM [1] contains the following:

Direct mode motion vector write:
Its base addr is right after decode output picture data
Its length is mbwidth*mbheight*64

Also both the mpp library and imx-vpu-hantro code both use mbwidth*mbheight*64.
So I feel confident that the buffer size is correct.

[1] Rockchip RK3288TRM V1.1 Part3-Graphic and multi-media.pdf

Regards,
Jonas

>
> Best regards,
> Tomasz
>

\
 
 \ /
  Last update: 2020-01-08 16:15    [W:0.069 / U:4.124 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site