lkml.org 
[lkml]   [2020]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] usb: cdns3: Fix: ARM core hang after connect/disconnect operation.
On Wed, Jan 08, 2020 at 12:37:18PM +0100, Pawel Laszczak wrote:
> The ARM core hang when access USB register after tens of thousands
> connect/disconnect operation.
>
> The issue was observed on platform with android system and is not easy
> to reproduce. During test controller works at HS device mode with host
> connected.
>
> The test is based on continuous disabling/enabling USB device function
> what cause continuous setting DEVDS/DEVEN bit in USB_CONF register.
>
> For testing was used composite device consisting from ADP and RNDIS
> function.
>
> Presumably the problem was caused by DMA transfer made after setting
> DEVDS bit. To resolve this issue fix stops all DMA transfer before
> setting DEVDS bit.
>
> Signed-off-by: Pawel Laszczak <pawell@cadence.com>
> Signed-off-by: Peter Chan <peter.chan@nxp.com>
> Reported-by: Peter Chan <peter.chan@nxp.com>
> Fixes: 7733f6c32e36 ("usb: cdns3: Add Cadence USB3 DRD Driver")
> ---
> drivers/usb/cdns3/gadget.c | 84 ++++++++++++++++++++++++++------------
> drivers/usb/cdns3/gadget.h | 1 +
> 2 files changed, 58 insertions(+), 27 deletions(-)

Any reason to forget linux-usb@vger.kernel.org for usb patches?

thanks,

greg k-h

\
 
 \ /
  Last update: 2020-01-08 15:23    [W:0.089 / U:1.712 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site