lkml.org 
[lkml]   [2020]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 13/16] dt-bindings: atmel-usart: add microchip,<chip>-usart
Date
Add microchip,<chip>-usart to DT bindings documentation. This is for
microchip,sam9x60-usart.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
Documentation/devicetree/bindings/mfd/atmel-usart.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 699fd3c9ace8..e5c7331abe09 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -1,10 +1,12 @@
* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)

Required properties for USART:
-- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
+- compatible: Should be "atmel,<chip>-usart", "microchip,<chip>-usart" or
+ "atmel,<chip>-dbgu".
The compatible <chip> indicated will be the first SoC to support an
additional mode or an USART new feature.
- For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
+ For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart",
+ "microchip,<chip>-usart".
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
- clock-names: tuple listing input clock names.
--
2.7.4
\
 
 \ /
  Last update: 2020-01-08 13:59    [W:0.088 / U:14.560 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site