lkml.org 
[lkml]   [2020]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 03/11] mmc: sdhci: add support for using external DMA devices
From
Date
Hi Baolin,

On 08/01/20 6:58 am, Baolin Wang wrote:
> Hi Faiz,
>
> On Mon, Jan 6, 2020 at 7:01 PM Faiz Abbas <faiz_abbas@ti.com> wrote:
>>
>> From: Chunyan Zhang <zhang.chunyan@linaro.org>
>>
>> Some standard SD host controllers can support both external dma
>> controllers as well as ADMA/SDMA in which the SD host controller
>> acts as DMA master. TI's omap controller is the case as an example.
>>
>> Currently the generic SDHCI code supports ADMA/SDMA integrated in
>> the host controller but does not have any support for external DMA
>> controllers implemented using dmaengine, meaning that custom code is
>> needed for any systems that use an external DMA controller with SDHCI.
>>
>> Fixes by Faiz Abbas <faiz_abbas@ti.com>:
>> 1. Map scatterlists before dmaengine_prep_slave_sg()
>> 2. Use dma_async() functions inside of the send_command() path and call
>> terminate_sync() in non-atomic context in case of an error.
>>
>> Signed-off-by: Chunyan Zhang <zhang.chunyan@linaro.org>
>> Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
>> ---
>> drivers/mmc/host/Kconfig | 3 +
>> drivers/mmc/host/sdhci.c | 228 ++++++++++++++++++++++++++++++++++++++-
>> drivers/mmc/host/sdhci.h | 8 ++
>> 3 files changed, 237 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
>> index d06b2dfe3c95..adef971582a1 100644
>> --- a/drivers/mmc/host/Kconfig
>> +++ b/drivers/mmc/host/Kconfig
>> @@ -1040,3 +1040,6 @@ config MMC_OWL
>> help
>> This selects support for the SD/MMC Host Controller on
>> Actions Semi Owl SoCs.
>> +
>> +config MMC_SDHCI_EXTERNAL_DMA
>> + bool
>> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
>> index f6999054abcf..8cc78c76bc3d 100644
>> --- a/drivers/mmc/host/sdhci.c
>> +++ b/drivers/mmc/host/sdhci.c
>> @@ -10,6 +10,7 @@
>> */
>>
>> #include <linux/delay.h>
>> +#include <linux/dmaengine.h>
>> #include <linux/ktime.h>
>> #include <linux/highmem.h>
>> #include <linux/io.h>
>> @@ -1157,6 +1158,188 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd)
>> sdhci_set_block_info(host, data);
>> }
>>
>> +#if IS_ENABLED(CONFIG_MMC_SDHCI_EXTERNAL_DMA)
>> +
>> +static int sdhci_external_dma_init(struct sdhci_host *host)
>> +{
>> + int ret = 0;
>> + struct mmc_host *mmc = host->mmc;
>> +
>> + host->tx_chan = dma_request_chan(mmc->parent, "tx");
>> + if (IS_ERR(host->tx_chan)) {
>> + ret = PTR_ERR(host->tx_chan);
>> + if (ret != -EPROBE_DEFER)
>> + pr_warn("Failed to request TX DMA channel.\n");
>> + host->tx_chan = NULL;
>> + return ret;
>> + }
>> +
>> + host->rx_chan = dma_request_chan(mmc->parent, "rx");
>> + if (IS_ERR(host->rx_chan)) {
>> + if (host->tx_chan) {
>> + dma_release_channel(host->tx_chan);
>> + host->tx_chan = NULL;
>> + }
>> +
>> + ret = PTR_ERR(host->rx_chan);
>> + if (ret != -EPROBE_DEFER)
>> + pr_warn("Failed to request RX DMA channel.\n");
>> + host->rx_chan = NULL;
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static struct dma_chan *sdhci_external_dma_channel(struct sdhci_host *host,
>> + struct mmc_data *data)
>> +{
>> + return data->flags & MMC_DATA_WRITE ? host->tx_chan : host->rx_chan;
>> +}
>> +
>> +static int sdhci_external_dma_setup(struct sdhci_host *host,
>> + struct mmc_command *cmd)
>> +{
>> + int ret, i;
>> + struct dma_async_tx_descriptor *desc;
>> + struct mmc_data *data = cmd->data;
>> + struct dma_chan *chan;
>> + struct dma_slave_config cfg;
>> + dma_cookie_t cookie;
>> + int sg_cnt;
>> +
>> + if (!host->mapbase)
>> + return -EINVAL;
>> +
>> + cfg.src_addr = host->mapbase + SDHCI_BUFFER;
>> + cfg.dst_addr = host->mapbase + SDHCI_BUFFER;
>> + cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> + cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
>> + cfg.src_maxburst = data->blksz / 4;
>> + cfg.dst_maxburst = data->blksz / 4;
>> +
>> + /* Sanity check: all the SG entries must be aligned by block size. */
>> + for (i = 0; i < data->sg_len; i++) {
>> + if ((data->sg + i)->length % data->blksz)
>> + return -EINVAL;
>> + }
>> +
>> + chan = sdhci_external_dma_channel(host, data);
>> +
>> + ret = dmaengine_slave_config(chan, &cfg);
>> + if (ret)
>> + return ret;
>> +
>> + sg_cnt = sdhci_pre_dma_transfer(host, data, COOKIE_MAPPED);
>> + if (sg_cnt <= 0)
>> + return -EINVAL;
>> +
>> + desc = dmaengine_prep_slave_sg(chan, data->sg, data->sg_len,
>> + mmc_get_dma_dir(data),
>> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
>> + if (!desc)
>> + return -EINVAL;
>> +
>> + desc->callback = NULL;
>> + desc->callback_param = NULL;
>> +
>> + cookie = dmaengine_submit(desc);
>> + if (cookie < 0)
>
> We usually use the DMA engine standard API: dma_submit_error() to
> validate the cookie.
>

The if condition is doing the same thing as the API. Do we really
require it?

Thanks,
Faiz

\
 
 \ /
  Last update: 2020-01-08 10:19    [W:0.106 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site