lkml.org 
[lkml]   [2020]   [Jan]   [8]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[net-next PATCH] net/ncsi: Support for multi host mellanox card
Date
Multi host Mellanox cards require MAC affinity to be set
before receiving any config commands. All config commands
should also have unicast address for source address in
command header.

Adding GMA and SMAF(Set Mac Affinity) for Mellanox card
and call these in channel probe state machine if it is
defined in device tree.

Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
---
net/ncsi/internal.h | 20 ++++++++++++
net/ncsi/ncsi-manage.c | 69 ++++++++++++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)

diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index ad3fd7f1da75..e37102546be6 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -64,6 +64,17 @@ enum {
NCSI_MODE_MAX
};

+/* Supported media status bits for Mellanox Mac affinity command.
+ * Bit (0-2) for different protocol support; Bit 1 for RBT support,
+ * bit 1 for SMBUS support and bit 2 for PCIE support. Bit (3-5)
+ * for different protocol availability. Bit 4 for RBT, bit 4 for
+ * SMBUS and bit 5 for PCIE.
+ */
+enum {
+ MLX_MC_RBT_SUPPORT = 0x01, /* MC supports RBT */
+ MLX_MC_RBT_AVL = 0x08, /* RBT medium is available */
+};
+
/* OEM Vendor Manufacture ID */
#define NCSI_OEM_MFR_MLX_ID 0x8119
#define NCSI_OEM_MFR_BCM_ID 0x113d
@@ -72,9 +83,15 @@ enum {
/* Mellanox specific OEM Command */
#define NCSI_OEM_MLX_CMD_GMA 0x00 /* CMD ID for Get MAC */
#define NCSI_OEM_MLX_CMD_GMA_PARAM 0x1b /* Parameter for GMA */
+#define NCSI_OEM_MLX_CMD_SMAF 0x01 /* CMD ID for Set MC Affinity */
+#define NCSI_OEM_MLX_CMD_SMAF_PARAM 0x07 /* Parameter for SMAF */
/* OEM Command payload lengths*/
#define NCSI_OEM_BCM_CMD_GMA_LEN 12
#define NCSI_OEM_MLX_CMD_GMA_LEN 8
+#define NCSI_OEM_MLX_CMD_SMAF_LEN 60
+/* Offset in OEM request */
+#define MLX_SMAF_MAC_ADDR_OFFSET 8 /* Offset for MAC in SMAF */
+#define MLX_SMAF_MED_SUPPORT_OFFSET 14 /* Offset for medium in SMAF */
/* Mac address offset in OEM response */
#define BCM_MAC_ADDR_OFFSET 28
#define MLX_MAC_ADDR_OFFSET 8
@@ -251,6 +268,8 @@ enum {
ncsi_dev_state_probe_deselect = 0x0201,
ncsi_dev_state_probe_package,
ncsi_dev_state_probe_channel,
+ ncsi_dev_state_probe_mlx_gma,
+ ncsi_dev_state_probe_mlx_smaf,
ncsi_dev_state_probe_cis,
ncsi_dev_state_probe_gvi,
ncsi_dev_state_probe_gc,
@@ -311,6 +330,7 @@ struct ncsi_dev_priv {
struct list_head vlan_vids; /* List of active VLAN IDs */

bool multi_package; /* Enable multiple packages */
+ bool mlx_multi_host; /* Enable multi host Mellanox */
u32 package_whitelist; /* Packages to configure */
};

diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index e20b81514029..1f387be7827b 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -8,6 +8,8 @@
#include <linux/init.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>

#include <net/ncsi.h>
#include <net/net_namespace.h>
@@ -730,6 +732,34 @@ static int ncsi_oem_gma_handler_mlx(struct ncsi_cmd_arg *nca)
return ret;
}

+static int ncsi_oem_smaf_mlx(struct ncsi_cmd_arg *nca)
+{
+ union {
+ u8 data_u8[NCSI_OEM_MLX_CMD_SMAF_LEN];
+ u32 data_u32[NCSI_OEM_MLX_CMD_SMAF_LEN / sizeof(u32)];
+ } u;
+ int ret = 0;
+
+ memset(&u, 0, sizeof(u));
+ u.data_u32[0] = ntohl(NCSI_OEM_MFR_MLX_ID);
+ u.data_u8[5] = NCSI_OEM_MLX_CMD_SMAF;
+ u.data_u8[6] = NCSI_OEM_MLX_CMD_SMAF_PARAM;
+ memcpy(&u.data_u8[MLX_SMAF_MAC_ADDR_OFFSET],
+ nca->ndp->ndev.dev->dev_addr, ETH_ALEN);
+ u.data_u8[MLX_SMAF_MED_SUPPORT_OFFSET] =
+ (MLX_MC_RBT_AVL | MLX_MC_RBT_SUPPORT);
+
+ nca->payload = NCSI_OEM_MLX_CMD_SMAF_LEN;
+ nca->data = u.data_u8;
+
+ ret = ncsi_xmit_cmd(nca);
+ if (ret)
+ netdev_err(nca->ndp->ndev.dev,
+ "NCSI: Failed to transmit cmd 0x%x during probe\n",
+ nca->type);
+ return ret;
+}
+
/* OEM Command handlers initialization */
static struct ncsi_oem_gma_handler {
unsigned int mfr_id;
@@ -1310,8 +1340,38 @@ static void ncsi_probe_channel(struct ncsi_dev_priv *ndp)
break;
}
nd->state = ncsi_dev_state_probe_cis;
+ if (IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC) &&
+ ndp->mlx_multi_host)
+ nd->state = ncsi_dev_state_probe_mlx_gma;
+
schedule_work(&ndp->work);
break;
+#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
+ case ncsi_dev_state_probe_mlx_gma:
+ ndp->pending_req_num = 1;
+
+ nca.type = NCSI_PKT_CMD_OEM;
+ nca.package = ndp->active_package->id;
+ nca.channel = 0;
+ ret = ncsi_oem_gma_handler_mlx(&nca);
+ if (ret)
+ goto error;
+
+ nd->state = ncsi_dev_state_probe_mlx_smaf;
+ break;
+ case ncsi_dev_state_probe_mlx_smaf:
+ ndp->pending_req_num = 1;
+
+ nca.type = NCSI_PKT_CMD_OEM;
+ nca.package = ndp->active_package->id;
+ nca.channel = 0;
+ ret = ncsi_oem_smaf_mlx(&nca);
+ if (ret)
+ goto error;
+
+ nd->state = ncsi_dev_state_probe_cis;
+ break;
+#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
case ncsi_dev_state_probe_cis:
ndp->pending_req_num = NCSI_RESERVED_CHANNEL;

@@ -1621,6 +1681,8 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
{
struct ncsi_dev_priv *ndp;
struct ncsi_dev *nd;
+ struct platform_device *pdev;
+ struct device_node *np;
unsigned long flags;
int i;

@@ -1667,6 +1729,13 @@ struct ncsi_dev *ncsi_register_dev(struct net_device *dev,
/* Set up generic netlink interface */
ncsi_init_netlink(dev);

+ pdev = to_platform_device(dev->dev.parent);
+ if (pdev) {
+ np = pdev->dev.of_node;
+ if (np && of_get_property(np, "mlx,multi-host", NULL))
+ ndp->mlx_multi_host = true;
+ }
+
return nd;
}
EXPORT_SYMBOL_GPL(ncsi_register_dev);
--
2.17.1
\
 
 \ /
  Last update: 2020-01-09 00:44    [W:0.075 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site