lkml.org 
[lkml]   [2020]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH 1/2] dt-bindings: touchscreen: Add touchscreen schema
On Tue, Jan 7, 2020 at 7:09 AM Benjamin Gaignard
<benjamin.gaignard@st.com> wrote:
>
> Add touchscreen schema for common properties
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
> ---
> .../bindings/input/touchscreen/touchscreen.yaml | 63 ++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml

Don't just add schema. Remove the old definitions. To avoid updating a
bunch of references to touchscreen.txt, I just put a 'see
touchscreen.yaml' in it.

> diff --git a/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> new file mode 100644
> index 000000000000..f6e7c73ef14e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/touchscreen.yaml
> @@ -0,0 +1,63 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/touchscreen.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Common touchscreen Bindings
> +
> +maintainers:
> + - Dmitry Torokhov <dmitry.torokhov@gmail.com>
> +
> +properties:
> + touchscreen-min-x:
> + description: minimum x coordinate reported (0 if not set)

You need a type reference on a bunch of these. And "(0 if not set)"
sounds like a 'default' constraint.

> +
> + touchscreen-min-y:
> + description: minimum y coordinate reported (0 if not set)
> +
> + touchscreen-size-x:
> + description: horizontal resolution of touchscreen (maximum x coordinate reported + 1)
> +
> + touchscreen-size-y:
> + description: vertical resolution of touchscreen (maximum y coordinate reported + 1)

I don't think it makes sense if both of these aren't present, so you need:

dependencies:
touchscreen-size-x: [ touchscreen-size-y ]
touchscreen-size-y: [ touchscreen-size-x ]

> +
> + touchscreen-max-pressure:
> + description: maximum reported pressure (arbitrary range dependent on the controller)
> +
> + touchscreen-min-pressure:
> + description: minimum pressure on the touchscreen to be achieved in order for the
> + touchscreen driver to report a touch event.
> +
> + touchscreen-fuzz-x:
> + description: horizontal noise value of the absolute input device (in pixels)
> +
> + touchscreen-fuzz-y:
> + description: vertical noise value of the absolute input device (in pixels)
> +
> + touchscreen-fuzz-pressure:
> + description: pressure noise value of the absolute input device (arbitrary range
> + dependent on the controller)
> +
> + touchscreen-average-samples:
> + description: Number of data samples which are averaged for each read (valid values
> + dependent on the controller)
> +
> + touchscreen-inverted-x:
> + description: X axis is inverted (boolean)
> + type: boolean
> +
> + touchscreen-inverted-y:
> + description: Y axis is inverted (boolean)
> + type: boolean
> +
> + touchscreen-swapped-x-y:
> + description: X and Y axis are swapped (boolean)
> + Swapping is done after inverting the axis
> + type: boolean
> +
> + touchscreen-x-mm:
> + description: horizontal length in mm of the touchscreen
> +
> + touchscreen-y-mm:
> + description: vertical length in mm of the touchscreen

Same dependencies here.

Rob

\
 
 \ /
  Last update: 2020-01-07 18:49    [W:0.060 / U:0.164 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site