Messages in this thread | | | From | Sébastien Szymanski <> | Subject | Re: [PATCH AUTOSEL 4.19 102/177] nvmem: imx-ocotp: reset error status on probe | Date | Tue, 7 Jan 2020 15:50:59 +0100 |
| |
On 12/10/19 10:31 PM, Sasha Levin wrote: > From: Lucas Stach <l.stach@pengutronix.de> > > [ Upstream commit c33c585f1b3a99d53920bdac614aca461d8db06f ] > > If software running before the OCOTP driver is loaded left the > controller with the error status pending, the driver will never > be able to complete the read timing setup. Reset the error status > on probe to make sure the controller is in usable state. > > Signed-off-by: Lucas Stach <l.stach@pengutronix.de> > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> > Link: https://lore.kernel.org/r/20191029114240.14905-6-srinivas.kandagatla@linaro.org > Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> > Signed-off-by: Sasha Levin <sashal@kernel.org> > --- > drivers/nvmem/imx-ocotp.c | 4 ++++ > 1 file changed, 4 insertions(+) > > diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c > index afb429a417fe0..926d9cc080cf4 100644 > --- a/drivers/nvmem/imx-ocotp.c > +++ b/drivers/nvmem/imx-ocotp.c > @@ -466,6 +466,10 @@ static int imx_ocotp_probe(struct platform_device *pdev) > if (IS_ERR(priv->clk)) > return PTR_ERR(priv->clk); > > + clk_prepare_enable(priv->clk); > + imx_ocotp_clr_err_if_set(priv->base); > + clk_disable_unprepare(priv->clk); > + > priv->params = of_device_get_match_data(&pdev->dev); > imx_ocotp_nvmem_config.size = 4 * priv->params->nregs; > imx_ocotp_nvmem_config.dev = dev; >
Hi,
This patch makes kernel 4.19.{92,93} hang at boot on my i.MX6ULL based board. It hanks at
[ 3.730078] cpu cpu0: Linked as a consumer to regulator.2 [ 3.737760] cpu cpu0: Linked as a consumer to regulator.3
Full boot log is here: https://pastebin.com/TS8EFxkr
The config is imx_v6_v7_defconfig.
Reverting it makes the kernels boot again.
Regards,
-- Sébastien Szymanski, Armadeus Systems Software engineer
| |