lkml.org 
[lkml]   [2020]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RESEND PATCH v5 07/11] phy: phy-mtk-tphy: add a property for internal resistance
Date
This is used to tune J-K voltage by internal R (resistance), the
range is [0, 31], the resistance value is about 6.9K ohm for 0,
3.8K ohm for 31, and the step is 1K ohm

Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
---
v5: no changes

v4: change commit log

v3: change commit log

v2: no changes
---
drivers/phy/mediatek/phy-mtk-tphy.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c
index 5afe33621dbc..4a2dc92f10f5 100644
--- a/drivers/phy/mediatek/phy-mtk-tphy.c
+++ b/drivers/phy/mediatek/phy-mtk-tphy.c
@@ -43,6 +43,8 @@
#define PA0_RG_USB20_INTR_EN BIT(5)

#define U3P_USBPHYACR1 0x004
+#define PA1_RG_INTR_CAL GENMASK(23, 19)
+#define PA1_RG_INTR_CAL_VAL(x) ((0x1f & (x)) << 19)
#define PA1_RG_VRT_SEL GENMASK(14, 12)
#define PA1_RG_VRT_SEL_VAL(x) ((0x7 & (x)) << 12)
#define PA1_RG_TERM_SEL GENMASK(10, 8)
@@ -302,6 +304,7 @@ struct mtk_phy_instance {
int eye_src;
int eye_vrt;
int eye_term;
+ int intr;
int discth;
bool bc12_en;
};
@@ -853,12 +856,14 @@ static void phy_parse_property(struct mtk_tphy *tphy,
&instance->eye_vrt);
device_property_read_u32(dev, "mediatek,eye-term",
&instance->eye_term);
+ device_property_read_u32(dev, "mediatek,intr",
+ &instance->intr);
device_property_read_u32(dev, "mediatek,discth",
&instance->discth);
- dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, disc:%d\n",
+ dev_dbg(dev, "bc12:%d, src:%d, vrt:%d, term:%d, intr:%d, disc:%d\n",
instance->bc12_en, instance->eye_src,
instance->eye_vrt, instance->eye_term,
- instance->discth);
+ instance->intr, instance->discth);
}

static void u2_phy_props_set(struct mtk_tphy *tphy,
@@ -895,6 +900,13 @@ static void u2_phy_props_set(struct mtk_tphy *tphy,
writel(tmp, com + U3P_USBPHYACR1);
}

+ if (instance->intr) {
+ tmp = readl(com + U3P_USBPHYACR1);
+ tmp &= ~PA1_RG_INTR_CAL;
+ tmp |= PA1_RG_INTR_CAL_VAL(instance->intr);
+ writel(tmp, com + U3P_USBPHYACR1);
+ }
+
if (instance->discth) {
tmp = readl(com + U3P_USBPHYACR6);
tmp &= ~PA6_RG_U2_DISCTH;
--
2.24.0
\
 
 \ /
  Last update: 2020-01-08 02:53    [W:0.087 / U:1.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site