lkml.org 
[lkml]   [2020]   [Jan]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 139/191] HID: i2c-hid: Reset ALPS touchpads on resume
Date
From: Kai-Heng Feng <kai.heng.feng@canonical.com>

commit fd70466d37bf3fe0118d18c56ddde85b428f86cf upstream.

Commit 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system
resume") fixes many touchpads and touchscreens, however ALPS touchpads
start to trigger IRQ storm after system resume.

Since it's total silence from ALPS, let's bring the old behavior back
to ALPS touchpads.

Fixes: 52cf93e63ee6 ("HID: i2c-hid: Don't reset device upon system resume")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/hid/i2c-hid/i2c-hid-core.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)

--- a/drivers/hid/i2c-hid/i2c-hid-core.c
+++ b/drivers/hid/i2c-hid/i2c-hid-core.c
@@ -48,6 +48,7 @@
#define I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV BIT(0)
#define I2C_HID_QUIRK_NO_IRQ_AFTER_RESET BIT(1)
#define I2C_HID_QUIRK_BOGUS_IRQ BIT(4)
+#define I2C_HID_QUIRK_RESET_ON_RESUME BIT(5)

/* flags */
#define I2C_HID_STARTED 0
@@ -174,6 +175,8 @@ static const struct i2c_hid_quirks {
I2C_HID_QUIRK_NO_IRQ_AFTER_RESET },
{ USB_VENDOR_ID_ELAN, HID_ANY_ID,
I2C_HID_QUIRK_BOGUS_IRQ },
+ { USB_VENDOR_ID_ALPS_JP, HID_ANY_ID,
+ I2C_HID_QUIRK_RESET_ON_RESUME },
{ 0, 0 }
};

@@ -1214,8 +1217,15 @@ static int i2c_hid_resume(struct device
* solves "incomplete reports" on Raydium devices 2386:3118 and
* 2386:4B33 and fixes various SIS touchscreens no longer sending
* data after a suspend/resume.
+ *
+ * However some ALPS touchpads generate IRQ storm without reset, so
+ * let's still reset them here.
*/
- ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+ if (ihid->quirks & I2C_HID_QUIRK_RESET_ON_RESUME)
+ ret = i2c_hid_hwreset(client);
+ else
+ ret = i2c_hid_set_power(client, I2C_HID_PWR_ON);
+
if (ret)
return ret;


\
 
 \ /
  Last update: 2020-01-07 22:40    [W:6.815 / U:0.040 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site