lkml.org 
[lkml]   [2020]   [Jan]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 0/9] leds: lm3692x: Allow to set ovp and brigthness mode
Hi,
On Mon, Jan 06, 2020 at 12:47:08AM +0100, Pavel Machek wrote:
> Hi!
>
> > Overvoltage protection and brightness mode are currently hardcoded
> > as 29V and disabled in the driver. Make these configurable via DT.
> >
> > Besides addressing review comments v3 folds in the patches to
> > disable the chip and turn of the regulator on brightness 0 from
> >
> > https://lore.kernel.org/linux-leds/20191226101419.GE4033@amd/T/#t
> >
> > Besides addressing review comments v2 also allows to limit the maximum led
> > current.
>
> > Patches are against next-20191220.
>
> I applied everything but the "exponential" changes and the last
> one. I'll apply the last one if I get version that applies on top of
> leds tree.

Thanks! Can I do anything to get the exponential part in? Is it because
you want the exponential mode to move to the backlight binding?

Cheers,
-- Guido

>
> Best regards,
> Pavel
>
> --
> (english) http://www.livejournal.com/~pavelmachek
> (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html


\
 
 \ /
  Last update: 2020-01-06 10:45    [W:0.129 / U:25.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site