lkml.org 
[lkml]   [2020]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [V2, 2/3] interconnect: qcom: Add SC7180 interconnect provider driver
From
Date
Quoting Odelu Kukatla (2019-12-31 00:58:56)
> diff --git a/drivers/interconnect/qcom/sc7180.c b/drivers/interconnect/qcom/sc7180.c
> new file mode 100644
> index 0000000..4a398e0
> --- /dev/null
> +++ b/drivers/interconnect/qcom/sc7180.c
> @@ -0,0 +1,788 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2019, The Linux Foundation. All rights reserved.
> + *
> + */
> +
> +#include <dt-bindings/interconnect/qcom,sc7180.h>

Can you include this after linux/ headers? That is the "preferred" way
to include headers.

> +#include <linux/device.h>
> +#include <linux/interconnect.h>
> +#include <linux/interconnect-provider.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>

Hopefully this include isn't used and can be removed.

> +#include <linux/of_platform.h>

Is this include used?

> +#include <linux/platform_device.h>
> +
> +#include "icc-rpmh.h"
> +#include "bcm-voter.h"
> +
[...]
> +
> +static struct qcom_icc_node *system_noc_nodes[] = {
> + [MASTER_SNOC_CFG] = &qhm_snoc_cfg,
> + [MASTER_A1NOC_SNOC] = &qnm_aggre1_noc,
> + [MASTER_A2NOC_SNOC] = &qnm_aggre2_noc,
> + [MASTER_GEM_NOC_SNOC] = &qnm_gemnoc,
> + [MASTER_PIMEM] = &qxm_pimem,
> + [SLAVE_APPSS] = &qhs_apss,
> + [SLAVE_SNOC_CNOC] = &qns_cnoc,
> + [SLAVE_SNOC_GEM_NOC_GC] = &qns_gemnoc_gc,
> + [SLAVE_SNOC_GEM_NOC_SF] = &qns_gemnoc_sf,
> + [SLAVE_IMEM] = &qxs_imem,
> + [SLAVE_PIMEM] = &qxs_pimem,
> + [SLAVE_SERVICE_SNOC] = &srvc_snoc,
> + [SLAVE_QDSS_STM] = &xs_qdss_stm,
> + [SLAVE_TCU] = &xs_sys_tcu_cfg,
> +};
> +
> +static struct qcom_icc_desc sc7180_system_noc = {

Can this be const? And the other ones?

> + .nodes = system_noc_nodes,
> + .num_nodes = ARRAY_SIZE(system_noc_nodes),
> + .bcms = system_noc_bcms,
> + .num_bcms = ARRAY_SIZE(system_noc_bcms),
> +};
> +
> +static int qnoc_probe(struct platform_device *pdev)
> +{
> + const struct qcom_icc_desc *desc;
> + struct icc_onecell_data *data;
> + struct icc_provider *provider;
> + struct qcom_icc_node **qnodes;
> + struct qcom_icc_provider *qp;
> + struct icc_node *node;
> + size_t num_nodes, i;
> + int ret;
> +
> + desc = of_device_get_match_data(&pdev->dev);

Use device_get_match_data() instead?

> + if (!desc)
> + return -EINVAL;
> +
> + qnodes = desc->nodes;
> + num_nodes = desc->num_nodes;
> +
> + qp = devm_kzalloc(&pdev->dev, sizeof(*qp), GFP_KERNEL);
> + if (!qp)
> + return -ENOMEM;
> +
> + data = devm_kcalloc(&pdev->dev, num_nodes, sizeof(*node), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + provider = &qp->provider;
> + provider->dev = &pdev->dev;
> + provider->set = qcom_icc_set;
> + provider->pre_aggregate = qcom_icc_pre_aggregate;
> + provider->aggregate = qcom_icc_aggregate;
> + provider->xlate = of_icc_xlate_onecell;
> + INIT_LIST_HEAD(&provider->nodes);
> + provider->data = data;
> +
> + qp->dev = &pdev->dev;
> + qp->bcms = desc->bcms;
> + qp->num_bcms = desc->num_bcms;
> +
> + qp->voter = of_bcm_voter_get(qp->dev, NULL);
> + if (IS_ERR(qp->voter))
> + return PTR_ERR(qp->voter);
> +
> + ret = icc_provider_add(provider);
> + if (ret) {
> + dev_err(&pdev->dev, "error adding interconnect provider\n");
> + return ret;
> + }
> +
> + for (i = 0; i < num_nodes; i++) {
> + size_t j;
> +
> + if (!qnodes[i])
> + continue;
> +
> + node = icc_node_create(qnodes[i]->id);
> + if (IS_ERR(node)) {
> + ret = PTR_ERR(node);
> + goto err;
> + }
> +
> + node->name = qnodes[i]->name;
> + node->data = qnodes[i];
> + icc_node_add(node, provider);
> +
> + dev_dbg(&pdev->dev, "registered node %pK %s %d\n", node,
> + qnodes[i]->name, node->id);

Is this more debug junk? Maybe if it is useful it can be part of the
core framework instead of in this driver?

> +
> + /* populate links */

Useless comment.

> + for (j = 0; j < qnodes[i]->num_links; j++)
> + icc_link_create(node, qnodes[i]->links[j]);
> +
> + data->nodes[i] = node;
> + }
> + data->num_nodes = num_nodes;
> +
> + for (i = 0; i < qp->num_bcms; i++)
> + qcom_icc_bcm_init(qp->bcms[i], &pdev->dev);
> +
> + platform_set_drvdata(pdev, qp);
> +
> + dev_dbg(&pdev->dev, "Registered SC7180 ICC\n");

This driver debug message is pretty useless. Please remove it.

> +
> + return ret;

return 0?

> +err:
> + icc_nodes_remove(provider);
> + icc_provider_del(provider);
> + return ret;
> +}
> +
> +static int qnoc_remove(struct platform_device *pdev)
> +{
> + struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
> +
> + icc_nodes_remove(&qp->provider);
> + return icc_provider_del(&qp->provider);
> +}
> +
> +static const struct of_device_id qnoc_of_match[] = {
> + { .compatible = "qcom,sc7180-aggre1-noc",
> + .data = &sc7180_aggre1_noc},
> + { .compatible = "qcom,sc7180-aggre2-noc",
> + .data = &sc7180_aggre2_noc},
> + { .compatible = "qcom,sc7180-camnoc-virt",
> + .data = &sc7180_camnoc_virt},
> + { .compatible = "qcom,sc7180-compute-noc",
> + .data = &sc7180_compute_noc},
> + { .compatible = "qcom,sc7180-config-noc",
> + .data = &sc7180_config_noc},
> + { .compatible = "qcom,sc7180-dc-noc",
> + .data = &sc7180_dc_noc},
> + { .compatible = "qcom,sc7180-gem-noc",
> + .data = &sc7180_gem_noc},
> + { .compatible = "qcom,sc7180-ipa-virt",
> + .data = &sc7180_ipa_virt},
> + { .compatible = "qcom,sc7180-mc-virt",
> + .data = &sc7180_mc_virt},
> + { .compatible = "qcom,sc7180-mmss-noc",
> + .data = &sc7180_mmss_noc},
> + { .compatible = "qcom,sc7180-npu-noc",
> + .data = &sc7180_npu_noc},
> + { .compatible = "qcom,sc7180-qup-virt",
> + .data = &sc7180_qup_virt},
> + { .compatible = "qcom,sc7180-system-noc",
> + .data = &sc7180_system_noc},
> + { },

Nitpick: Drop the comma as it's the sentinel and nothing can come after.

> +};
> +MODULE_DEVICE_TABLE(of, qnoc_of_match);

\
 
 \ /
  Last update: 2020-01-05 07:56    [W:0.083 / U:8.468 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site