lkml.org 
[lkml]   [2020]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [linux-sunxi] [PATCH v2 4/9] power: supply: axp20x_ac_power: Add wakeup control
On Sun, Jan 5, 2020 at 6:24 PM Chen-Yu Tsai <wens@csie.org> wrote:
>
> On Sun, Jan 5, 2020 at 9:24 AM Samuel Holland <samuel@sholland.org> wrote:
> >
> > The AC power supply input can be used as a wakeup source. Hook up the
> > ACIN_PLUGIN IRQ to trigger wakeup based on userspace configuration.
> >
> > To do this, we must remember the list of IRQs for the life of the
> > device. To know how much space to allocate for the flexible array
> > member, we switch from using a NULL sentinel to using an array length.
> >
> > Because we now depend on the specific order of the IRQs (we assume
> > ACIN_PLUGIN is first and always present), failing to acquire an IRQ
> > during probe must be a fatal error.
> >
> > To avoid spuriously waking up the system when the AC power supply is
> > not configured as a wakeup source, we must explicitly disable all non-
> > wake IRQs during system suspend. This is because the SoC's NMI input is
> > shared among all IRQs on the AXP PMIC. Due to the use of regmap-irq, the
> > individual IRQs within the PMIC are nested threaded interrupts, and are
> > therefore not automatically disabled during system suspend.
> >
> > The upshot is that if any other device within the MFD (such as the power
> > key) is an enabled wakeup source, all enabled IRQs within the PMIC will
> > cause wakeup. We still need to call enable_irq_wake() when we *do* want
> > wakeup, in case those other wakeup sources on the PMIC are all disabled.
> >
> > Signed-off-by: Samuel Holland <samuel@sholland.org>
> > ---
> > drivers/power/supply/axp20x_ac_power.c | 91 +++++++++++++++++++++-----
> > 1 file changed, 74 insertions(+), 17 deletions(-)
> >
> > diff --git a/drivers/power/supply/axp20x_ac_power.c b/drivers/power/supply/axp20x_ac_power.c
> > index bc2663cd47fa..177b5c1eee8f 100644
> > --- a/drivers/power/supply/axp20x_ac_power.c
> > +++ b/drivers/power/supply/axp20x_ac_power.c

[...]

> > @@ -284,12 +335,14 @@ static int axp20x_ac_power_probe(struct platform_device *pdev)
> > return -EINVAL;
> > }
> >
> > - power = devm_kzalloc(&pdev->dev, sizeof(*power), GFP_KERNEL);
> > + axp_data = of_device_get_match_data(&pdev->dev);
> > +
> > + power = devm_kzalloc(&pdev->dev,
> > + struct_size(power, irqs, axp_data->num_irq_names),
> > + GFP_KERNEL);
> > if (!power)
> > return -ENOMEM;
> >
> > - axp_data = of_device_get_match_data(&pdev->dev);
> > -
>
> This change doesn't seem related, nor is it needed.

Nevermind, I see it.

> > if (axp_data->acin_adc) {
> > power->acin_v = devm_iio_channel_get(&pdev->dev, "acin_v");
> > if (IS_ERR(power->acin_v)) {

Reviewed-by: Chen-Yu Tsai <wens@csie.org>

\
 
 \ /
  Last update: 2020-01-05 11:46    [W:0.042 / U:14.836 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site