lkml.org 
[lkml]   [2020]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH v1 1/2] scsi: ufs: set device as default active power mode during initialization only
Date
Hi Stanley,
I am aware that this discussion is already concluded,
Just pointing out a small issue that might ease your mind further.

Thanks,
Avri

>
> Hi Can,
>
> On Tue, 2019-12-31 at 16:35 +0800, Can Guo wrote:
>
> > Hi Stanley,
> >
> > I missed this mail before I hit send. In current code, as per my
> > understanding, UFS device's power state should be Active after
> > ufshcd_link_startup() returns.
> > If I am wrong, please feel free to correct me.
> >
>
> Yes, this assumption of ufshcd_probe_hba() is true so I will drop this patch.
> Thanks for remind.
>
> > Due to you are almost trying to revert commit 7caf489b99a42a, I am
> > just wondering if you encounter failure/error caused by it.
>
> Yes, we actually have some doubts from the commit message of "scsi: ufs:
> issue link startup 2 times if device isn't active"
>
> If we configured system suspend as device=PowerDown/Link=LinkDown mode,
> during resume, the 1st link startup will be successful, and after that device could
> be accessed normally so it shall be already in Active power mode. We did not
> find devices which need twice linkup for normal work.
>
> And because the 1st linkup is OK, the forced 2nd linkup by commit "scsi:
> ufs: issue link startup 2 times if device isn't active" leads to link lost and finally
> the 3rd linkup is made again by retry mechanism in
> ufshcd_link_startup() and be successful. So a linkup performance issue is
> introduced here: We actually need one-time linkup only but finally got 3 linkup
> operations.
>
> According to the UFS spec, all reset types (including POR and Host UniPro Warm
> Reset which both may happen in above configurations) other than LU reset, UFS
> device power mode shall return to Sleep mode or Active mode depending on
> bInitPowerMode, by default, it's Active mode.
As for bInitPowerMode - please see the discussion in https://www.mail-archive.com/linux-scsi@vger.kernel.org/msg78262.html



>
> So we are curious that why enforcing twice linkup is necessary here?
> Could you kindly help us clarify this?
\
 
 \ /
  Last update: 2020-01-05 08:56    [W:0.104 / U:20.972 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site