lkml.org 
[lkml]   [2020]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 03/20] usb: phy: tegra: Clean up ulpi_phy_power_off
Date
Firstly, the PHY's clock needs to unprepared to keep prepare count
balanced. Secondly, downstream code suggests that reset is synchronous
and thus it should be asserted before disabling clock.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
---
drivers/usb/phy/phy-tegra-usb.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c
index ea7ef1dc0b42..99acfde4ab8d 100644
--- a/drivers/usb/phy/phy-tegra-usb.c
+++ b/drivers/usb/phy/phy-tegra-usb.c
@@ -757,8 +757,19 @@ static int ulpi_phy_power_on(struct tegra_usb_phy *phy)

static int ulpi_phy_power_off(struct tegra_usb_phy *phy)
{
- clk_disable(phy->clk);
- return gpio_direction_output(phy->reset_gpio, 0);
+ int err;
+
+ err = gpio_direction_output(phy->reset_gpio, 0);
+ if (err) {
+ dev_err(phy->u_phy.dev, "reset GPIO not asserted: %d\n", err);
+ return err;
+ }
+
+ usleep_range(5000, 6000);
+
+ clk_disable_unprepare(phy->clk);
+
+ return 0;
}

static void tegra_usb_phy_close(struct tegra_usb_phy *phy)
--
2.24.0
\
 
 \ /
  Last update: 2020-01-06 02:36    [W:0.089 / U:40.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site