lkml.org 
[lkml]   [2020]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/26] docs: i2c: i2c-protocol: use proper names for ACK and NACK
Date
Use the proper ACK and NACK naming from the I2C specification instead of
"accept" and "reverse accept".

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
---
Documentation/i2c/i2c-protocol.rst | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/i2c/i2c-protocol.rst b/Documentation/i2c/i2c-protocol.rst
index 66adac3a5afd..9a4ac944cf9d 100644
--- a/Documentation/i2c/i2c-protocol.rst
+++ b/Documentation/i2c/i2c-protocol.rst
@@ -11,7 +11,7 @@ Key to symbols
S Start condition
P Stop condition
Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0.
-A, NA (1 bit) Accept and reverse accept bit.
+A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit
Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to
get a 10 bit I2C address.
Comm (8 bits) Command byte, a data byte which often selects a register on
--
2.24.1
\
 
 \ /
  Last update: 2020-01-05 23:52    [W:0.314 / U:0.340 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site