lkml.org 
[lkml]   [2020]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Subject[PATCH net-next 0/3] ethtool: allow nesting of begin() and complete() callbacks
Date
The ethtool ioctl interface used to guarantee that ethtool_ops callbacks
were always called in a block between calls to ->begin() and ->complete()
(if these are defined) and that this whole block was executed with RTNL
lock held:

rtnl_lock();
ops->begin();
/* other ethtool_ops calls */
ops->complete();
rtnl_unlock();

This prevented any nesting or crossing of the begin-complete blocks.
However, this is no longer guaranteed even for ioctl interface as at least
ethtool_phys_id() releases RTNL lock while waiting for a timer. With the
introduction of netlink ethtool interface, the begin-complete pairs are
naturally nested e.g. when a request triggers a netlink notification.

Fortunately, only minority of networking drivers implements begin() and
complete() callbacks and most of those that do, fall into three groups:

- wrappers for pm_runtime_get_sync() and pm_runtime_put()
- wrappers for clk_prepare_enable() and clk_disable_unprepare()
- begin() checks netif_running() (fails if false), no complete()

First two have their own refcounting, third is safe w.r.t. nesting of the
blocks.

Only three in-tree networking drivers need an update to deal with nesting
of begin() and complete() calls: via-velocity and epic100 perform resume
and suspend on their own and wil6210 completely serializes the calls using
its own mutex (which would lead to a deadlock if a request request
triggered a netlink notification). The series addresses these problems.


Michal Kubecek (3):
wil6210: get rid of begin() and complete() ethtool_ops
via-velocity: allow nesting of ethtool_ops begin() and complete()
epic100: allow nesting of ethtool_ops begin() and complete()

drivers/net/ethernet/smsc/epic100.c | 7 +++-
drivers/net/ethernet/via/via-velocity.c | 14 +++++--
drivers/net/ethernet/via/via-velocity.h | 1 +
drivers/net/wireless/ath/wil6210/ethtool.c | 43 ++++++++--------------
4 files changed, 32 insertions(+), 33 deletions(-)

--
2.24.1

\
 
 \ /
  Last update: 2020-01-05 22:17    [W:0.054 / U:1.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site