lkml.org 
[lkml]   [2020]   [Jan]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 3/3] ARM: dts: sun8i: R40: Add SPI controllers nodes and pinmuxes
On Sun, Jan 05, 2020 at 04:40:58PM +0000, André Przywara wrote:
> On 04/01/2020 10:04, Maxime Ripard wrote:
> >> But more importantly: what are the guidelines for using this tag? I
> >> understand the desire to provide every possible pin description on
> >> one hand, but wanting to avoid having *all of them* in *each* .dtb
> >> on the other.
> >
> > Pin groups will take a lot of space in the dtb, and the DT parsing
> > will take some measurable time,
>
> Really? Where is that? In Linux, or in U-Boot, possibly with the caches
> off? I am just curious. AFAIK there are some inefficient algorithms in
> libfdt (which trade performance for a smaller memory footprint), but I
> thought those would be called only very rarely.

The last time I measured it was in U-Boot (and for the FIT image, not
an actual DT), but the parsing time for a FIT image with a kernel and
DTB was around 100ms.

(and adding the PSCI and simplefb nodes was in the same order of
magnitude).

Boot time was very sensitive, and I had to remove both.

> >> And should there be a dtc command line option to ignore those tags,
> >> or even to apply this tag (virtually) to every node?
> >
> > Most of the nodes are (reference) leaves in a DT though. Pretty much
> > all the device nodes have no references pointing to them, just like
> > most of the buses, the CPU nodes, etc. And I'm pretty sure you want to
> > keep them :)
>
> Yeah, that was a New-Year's brain-fart of mine ;-)
>
> While I was changing the patch I figured that it gets quite lengthy.
> Also looking at the a20.dtsi, I see that *all* pin groups have this tag
> now. Wouldn't it be easier to introduce *one* tag that applies that to
> all children of a node?

I don't really know, I'm not sure the proliferation of tags would be a
good thing either, and I'm not the dtc maintainer, so I don't really
have a say in this :)

> Another thing I was wondering about: Would we gain something by not
> compiling nodes which have status = "disabled"? This is mentioned as a
> generic property in the DT spec, although it says there that the exact
> meaning is device dependent. But it sound still worthwhile, especially
> since we would avoid more pin groups to be compiled in.

I guess that would be good too, but the semantics are a bit different
so we'd need a different tag.

Maxime

\
 
 \ /
  Last update: 2020-01-05 19:28    [W:0.044 / U:46.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site