lkml.org 
[lkml]   [2020]   [Jan]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v2 1/8] dt-bindings: remoteproc: Add Qualcomm PIL info binding
    On Thu, Dec 26, 2019 at 09:32:08PM -0800, Bjorn Andersson wrote:
    > Add a devicetree binding for the Qualcomm periperal image loader
    > relocation info region found in the IMEM.
    >
    > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
    > ---
    >
    > Changes since v1:
    > - New patch
    >
    > .../bindings/remoteproc/qcom,pil-info.yaml | 35 +++++++++++++++++++
    > 1 file changed, 35 insertions(+)
    > create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
    >
    > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
    > new file mode 100644
    > index 000000000000..715945c683ed
    > --- /dev/null
    > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pil-info.yaml
    > @@ -0,0 +1,35 @@
    > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
    > +%YAML 1.2
    > +---
    > +$id: "http://devicetree.org/schemas/remoteproc/qcom,pil-info.yaml#"
    > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
    > +
    > +title: Qualcomm peripheral image loader relocation info binding
    > +
    > +description:
    > + This document defines the binding for describing the Qualcomm peripheral
    > + image loader relocation memory region, in IMEM, which is used for post mortem
    > + debugging of remoteprocs.
    > +
    > +maintainers:
    > + - Bjorn Andersson <bjorn.andersson@linaro.org>
    > +
    > +properties:
    > + compatible:
    > + const: qcom,pil-reloc-info
    > +
    > + offset:
    > + $ref: /schemas/types.yaml#/definitions/uint32
    > + description: Offset in the register map for the memory region

    Why not use 'reg' instead?

    > +
    > +examples:
    > + - |
    > + imem@146bf000 {
    > + compatible = "syscon", "simple-mfd";
    > + reg = <0 0x146bf000 0 0x1000>;
    > +
    > + pil-reloc {
    > + compatible ="qcom,pil-reloc-info";
    > + offset = <0x94c>;
    > + };
    > + };
    > --
    > 2.24.0
    >

    \
     
     \ /
      Last update: 2020-01-04 22:39    [W:3.147 / U:0.896 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site