lkml.org 
[lkml]   [2020]   [Jan]   [30]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH v3 6/9] drivers: thermal: tsens: Add watchdog support
On Fri, Jan 3, 2020 at 1:25 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Thu 02 Jan 06:54 PST 2020, Amit Kucheria wrote:
> [..]
> > diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> > index 4cf550766cf6..ecbc722eb348 100644
> > --- a/drivers/thermal/qcom/tsens-common.c
> > +++ b/drivers/thermal/qcom/tsens-common.c
> > @@ -377,6 +377,24 @@ irqreturn_t tsens_critical_irq_thread(int irq, void *data)
> > struct tsens_irq_data d;
> > unsigned long flags;
> > int temp, ret, i;
> > + u32 wdog_status, wdog_count;
> > +
> > + if (priv->feat->has_watchdog) {
> > + /* Watchdog is present only on v2.3+ */
>
> Please omit this comment, you're carrying the motivation for this
> decision when you set has_watchdog already.

Will fix.

>
> > + ret = regmap_field_read(priv->rf[WDOG_BARK_STATUS], &wdog_status);
> > + if (ret)
> > + return ret;
> > +
> > + /* Clear WDOG interrupt */
> > + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 1);
> > + regmap_field_write(priv->rf[WDOG_BARK_CLEAR], 0);
>
> Are you sure you need to zero the clear register?

Yes, the corresponding downstream code is as follows:
/*
* Clear watchdog interrupt and
* increment global wd count
*/
writel_relaxed(wd_mask | TSENS_TM_CRITICAL_WD_BARK,
(TSENS_TM_CRITICAL_INT_CLEAR
(tm->tsens_tm_addr)));
writel_relaxed(wd_mask & ~(TSENS_TM_CRITICAL_WD_BARK),
(TSENS_TM_CRITICAL_INT_CLEAR
(tm->tsens_tm_addr)));


> > +
> > + ret = regmap_field_read(priv->rf[WDOG_BARK_COUNT], &wdog_count);
> > + if (ret)
> > + return ret;
> > + if (wdog_count)
> > + dev_dbg(priv->dev, "%s: watchdog count: %d\n", __func__, wdog_count);
> > + }
> >
> [..]
> > @@ -793,6 +815,22 @@ int __init init_common(struct tsens_priv *priv)
> > }
> > }
> >
> > + if (tsens_version(priv) > VER_1_X && ver_minor > 2) {
> > + /* Watchdog is present only on v2.3+ */
> > + priv->feat->has_watchdog = 1;
> > + for (i = WDOG_BARK_STATUS; i <= CC_MON_MASK; i++) {
> > + priv->rf[i] = devm_regmap_field_alloc(dev, priv->tm_map,
> > + priv->fields[i]);
> > + if (IS_ERR(priv->rf[i])) {
> > + ret = PTR_ERR(priv->rf[i]);
> > + goto err_put_device;
> > + }
> > + }
> > + /* Enable WDOG and disable cycle completion monitoring */
>
> Commit message says you're not enabling it. Should this say "WDOG is
> already configured, unmask the bark" or something along those lines?

Will reword

>
> > + regmap_field_write(priv->rf[WDOG_BARK_MASK], 0);
> > + regmap_field_write(priv->rf[CC_MON_MASK], 1);
> > + }
> > +
> > spin_lock_init(&priv->ul_lock);
> > tsens_enable_irq(priv);
> > tsens_debug_init(op);
>
> Regards,
> Bjorn

Thanks for the review.

\
 
 \ /
  Last update: 2020-01-30 13:13    [W:0.071 / U:1.480 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site