lkml.org 
[lkml]   [2020]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RESEND PATCH v6 03/17] drm/mediatek: move dsi/dpi select input into mtk_ddp_sel_in
From
Date
Hi, Yongqiang:

On Fri, 2020-01-03 at 11:12 +0800, Yongqiang Niu wrote:
> move dsi/dpi select input into mtk_ddp_sel_in
> DPI_SEL_IN_BLS is zero, it is same with hardware default setting,
> DISP_REG_CONFIG_DPI_SEL no need set when bls connect with
> dpi0

I think you have done two things in this patch. One is remove
DISP_REG_CONFIG_DPI_SEL setting, and the other is move
DISP_REG_CONFIG_DSI_SEL from mtk_ddp_sout_sel() to mtk_ddp_sel_in(). So
separate this into two patches.

Regards,
CK

>
> Signed-off-by: Yongqiang Niu <yongqiang.niu@mediatek.com>
> ---
> drivers/gpu/drm/mediatek/mtk_drm_ddp.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> index 39700b9..d66ce31 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_ddp.c
> @@ -376,6 +376,9 @@ static unsigned int mtk_ddp_sel_in(enum mtk_ddp_comp_id cur,
> } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DSI0) {
> *addr = DISP_REG_CONFIG_DSI_SEL;
> value = DSI_SEL_IN_BLS;
> + } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
> + *addr = DISP_REG_CONFIG_DSI_SEL;
> + value = DSI_SEL_IN_RDMA;
> } else {
> value = 0;
> }
> @@ -393,10 +396,6 @@ static void mtk_ddp_sout_sel(struct regmap *config_regs,
> } else if (cur == DDP_COMPONENT_BLS && next == DDP_COMPONENT_DPI0) {
> regmap_write(config_regs, DISP_REG_CONFIG_OUT_SEL,
> BLS_TO_DPI_RDMA1_TO_DSI);
> - regmap_write(config_regs, DISP_REG_CONFIG_DSI_SEL,
> - DSI_SEL_IN_RDMA);
> - regmap_write(config_regs, DISP_REG_CONFIG_DPI_SEL,
> - DPI_SEL_IN_BLS);
> }
> }
>

\
 
 \ /
  Last update: 2020-01-03 06:37    [W:0.206 / U:0.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site