[lkml]   [2020]   [Jan]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
Messages in this thread
SubjectRe: [PATCH v4 13/13] phy: usb: Add support for wake and USB low power mode for 7211 S2/S5
On 1/3/20 10:18 AM, Al Cooper wrote:
> Add support for 7211 USB wake. Disable all possible 7211 USB logic
> for S2/S5 if USB wake is not enabled.
> On the 7211, the XHCI wake signal was not connected properly and
> only goes to the USB1_USB1_CTRL_TP_DIAG1 diagonstic register.
> The workaround is to have VPU code running that polls for the
> proper bit in the DIAG register and to wake the system when
> the bit is asserted.
> Signed-off-by: Al Cooper <>

Reviewed-by: Florian Fainelli <>

 \ /
  Last update: 2020-01-03 19:29    [W:0.109 / U:6.360 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site