lkml.org 
[lkml]   [2020]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 064/104] Input: pm8xxx-vib - fix handling of separate enable register
Date
From: Stephan Gerhold <stephan@gerhold.net>

commit 996d5d5f89a558a3608a46e73ccd1b99f1b1d058 upstream.

Setting the vibrator enable_mask is not implemented correctly:

For regmap_update_bits(map, reg, mask, val) we give in either
regs->enable_mask or 0 (= no-op) as mask and "val" as value.
But "val" actually refers to the vibrator voltage control register,
which has nothing to do with the enable_mask.

So we usually end up doing nothing when we really wanted
to enable the vibrator.

We want to set or clear the enable_mask (to enable/disable the vibrator).
Therefore, change the call to always modify the enable_mask
and set the bits only if we want to enable the vibrator.

Fixes: d4c7c5c96c92 ("Input: pm8xxx-vib - handle separate enable register")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/input/misc/pm8xxx-vibrator.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/input/misc/pm8xxx-vibrator.c
+++ b/drivers/input/misc/pm8xxx-vibrator.c
@@ -90,7 +90,7 @@ static int pm8xxx_vib_set(struct pm8xxx_

if (regs->enable_mask)
rc = regmap_update_bits(vib->regmap, regs->enable_addr,
- on ? regs->enable_mask : 0, val);
+ regs->enable_mask, on ? ~0 : 0);

return rc;
}

\
 
 \ /
  Last update: 2020-01-28 15:04    [W:0.330 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site