lkml.org 
[lkml]   [2020]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH for-next 1/4] dmaengine: ti: k3-udma: Use ktime/usleep_range based TX completion check
From
Date
Hi Vinod,

On 1/28/2020 5:18 PM, Vinod Koul wrote:
> On 27-01-20, 15:21, Peter Ujfalusi wrote:
>> From: Vignesh Raghavendra <vigneshr@ti.com>
>>
>> In some cases (McSPI for example) the jiffie and delayed_work based
>> workaround can cause big throughput drop.
>>
>> Switch to use ktime/usleep_range based implementation to be able
>> to sustain speed for PDMA based peripherals.
>>
>> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>> ---
>> drivers/dma/ti/k3-udma.c | 80 ++++++++++++++++++++++++++--------------
>> 1 file changed, 53 insertions(+), 27 deletions(-)
>>
>> diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c
>> index ea79c2df28e0..fb59c869a6a7 100644
>> --- a/drivers/dma/ti/k3-udma.c
>> +++ b/drivers/dma/ti/k3-udma.c
>> @@ -5,6 +5,7 @@
>> */
>>
>> #include <linux/kernel.h>
>> +#include <linux/delay.h>
>> #include <linux/dmaengine.h>
>> #include <linux/dma-mapping.h>
>> #include <linux/dmapool.h>
>> @@ -169,7 +170,7 @@ enum udma_chan_state {
>>
>> struct udma_tx_drain {
>> struct delayed_work work;
>> - unsigned long jiffie;
>> + ktime_t tstamp;
>> u32 residue;
>> };
>>
>> @@ -946,9 +947,10 @@ static bool udma_is_desc_really_done(struct udma_chan *uc, struct udma_desc *d)
>> peer_bcnt = udma_tchanrt_read(uc->tchan, UDMA_TCHAN_RT_PEER_BCNT_REG);
>> bcnt = udma_tchanrt_read(uc->tchan, UDMA_TCHAN_RT_BCNT_REG);
>>
>> + /* Transfer is incomplete, store current residue and time stamp */
>> if (peer_bcnt < bcnt) {
>> uc->tx_drain.residue = bcnt - peer_bcnt;
>> - uc->tx_drain.jiffie = jiffies;
>> + uc->tx_drain.tstamp = ktime_get();
>
> Any reason why ktime_get() is better than jiffies..?

Resolution of jiffies is 4ms. ktime_t is has better resolution (upto ns
scale). With jiffies, I observed that code was either always polling DMA
progress counters (which affects HW data transfer speed) or sleeping too
long, both causing performance loss. Switching to ktime_t provides
better prediction of how long transfer takes to complete.

Regards
Vignesh

\
 
 \ /
  Last update: 2020-01-28 13:06    [W:0.069 / U:0.532 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site