lkml.org 
[lkml]   [2020]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 2/3] hwmon: (pmbus/ltc2978): Fix PMBus polling of MFR_COMMON definitions.
Date
Change 21537dc driver PMBus polling of MFR_COMMON from bits 5/4 to
bits 6/5. This fixs a LTC297X family bug where polling always returns
not busy even when the part is busy. This fixes a LTC388X and
LTM467X bug where polling used PEND and NOT_IN_TRANS, and BUSY was
not polled, which can lead to NACKing of commands. LTC388X and
LTM467X modules now poll BUSY and PEND, increasing reliability by
eliminating NACKing of commands.

Signed-off-by: Mike Jones <michael-a1.jones@analog.com>
---
drivers/hwmon/pmbus/ltc2978.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/hwmon/pmbus/ltc2978.c b/drivers/hwmon/pmbus/ltc2978.c
index f01f488..a91ed01 100644
--- a/drivers/hwmon/pmbus/ltc2978.c
+++ b/drivers/hwmon/pmbus/ltc2978.c
@@ -82,8 +82,8 @@ enum chips { ltc2974, ltc2975, ltc2977, ltc2978, ltc2980, ltc3880, ltc3882,

#define LTC_POLL_TIMEOUT 100 /* in milli-seconds */

-#define LTC_NOT_BUSY BIT(5)
-#define LTC_NOT_PENDING BIT(4)
+#define LTC_NOT_BUSY BIT(6)
+#define LTC_NOT_PENDING BIT(5)

/*
* LTC2978 clears peak data whenever the CLEAR_FAULTS command is executed, which
--
2.7.4
\
 
 \ /
  Last update: 2020-01-28 19:11    [W:0.092 / U:0.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site