lkml.org 
[lkml]   [2020]   [Jan]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4.14 18/46] hwmon: Deal with errors from the thermal subsystem
Date
From: Linus Walleij <linus.walleij@linaro.org>

commit 47c332deb8e89f6c59b0bb2615945c6e7fad1a60 upstream.

If the thermal subsystem returne -EPROBE_DEFER or any other error
when hwmon calls devm_thermal_zone_of_sensor_register(), this is
silently ignored.

I ran into this with an incorrectly defined thermal zone, making
it non-existing and thus this call failed with -EPROBE_DEFER
assuming it would appear later. The sensor was still added
which is incorrect: sensors must strictly be added after the
thermal zones, so deferred probe must be respected.

Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/hwmon/hwmon.c | 21 +++++++++++++++++----
1 file changed, 17 insertions(+), 4 deletions(-)

--- a/drivers/hwmon/hwmon.c
+++ b/drivers/hwmon/hwmon.c
@@ -143,6 +143,7 @@ static int hwmon_thermal_add_sensor(stru
struct hwmon_device *hwdev, int index)
{
struct hwmon_thermal_data *tdata;
+ struct thermal_zone_device *tzd;

tdata = devm_kzalloc(dev, sizeof(*tdata), GFP_KERNEL);
if (!tdata)
@@ -151,8 +152,14 @@ static int hwmon_thermal_add_sensor(stru
tdata->hwdev = hwdev;
tdata->index = index;

- devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata,
- &hwmon_thermal_ops);
+ tzd = devm_thermal_zone_of_sensor_register(&hwdev->dev, index, tdata,
+ &hwmon_thermal_ops);
+ /*
+ * If CONFIG_THERMAL_OF is disabled, this returns -ENODEV,
+ * so ignore that error but forward any other error.
+ */
+ if (IS_ERR(tzd) && (PTR_ERR(tzd) != -ENODEV))
+ return PTR_ERR(tzd);

return 0;
}
@@ -621,14 +628,20 @@ __hwmon_device_register(struct device *d
if (!chip->ops->is_visible(drvdata, hwmon_temp,
hwmon_temp_input, j))
continue;
- if (info[i]->config[j] & HWMON_T_INPUT)
- hwmon_thermal_add_sensor(dev, hwdev, j);
+ if (info[i]->config[j] & HWMON_T_INPUT) {
+ err = hwmon_thermal_add_sensor(dev,
+ hwdev, j);
+ if (err)
+ goto free_device;
+ }
}
}
}

return hdev;

+free_device:
+ device_unregister(hdev);
free_hwmon:
kfree(hwdev);
ida_remove:

\
 
 \ /
  Last update: 2020-01-28 15:51    [W:0.154 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site