lkml.org 
[lkml]   [2020]   [Jan]   [27]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] dt-bindings: iio: amplifiers: Add docs for HMC425A Step Attenuator
On Wed, Jan 22, 2020 at 02:17:01PM +0200, Beniamin Bia wrote:
> From: Michael Hennerich <michael.hennerich@analog.com>
>
> Document support for Analog Devices MC425A Step Attenuator.
>
> Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
> ---
> .../bindings/iio/amplifiers/adi,hmc425a.yaml | 56 +++++++++++++++++++
> 1 file changed, 56 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> new file mode 100644
> index 000000000000..a0afa661f4ac
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/amplifiers/adi,hmc425a.yaml
> @@ -0,0 +1,56 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license new bindings:

(GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: HMC425A 6-bit Digital Step Attenuator
> +
> +maintainers:
> +- Michael Hennerich <michael.hennerich@analog.com>
> +- Beniamin Bia <beniamin.bia@analog.com>
> +
> +description: |
> + Digital Step Attenuator IIO device with gpio interface.
> + HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
> + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf
> +
> +properties:
> + compatible:
> + enum:
> + - adi,hmc425a
> +
> + vcc-supply:
> + description:
> + Digital voltage regulator (see regulator/regulator.txt)
> + maxItems: 1

All supplies are a single entry, so drop this. Really,
'vcc-supply: true' is sufficient.

> +
> + ctrl-gpios:
> + description:
> + Must contain an array of 6 GPIO specifiers, referring to the GPIO pins
> + connected to the control pins V1-V6.
> + maxItems: 6
> +
> +required:
> + - compatible
> + - ctrl-gpios
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> + gpio {
> + #address-cells = <1>;
> + #size-cells = <0>;

GPIO clients are not child nodes of GPIO controllers, so you can remove
this node.

> + gpio_hmc425a: hmc425a {
> + compatible = "adi,hmc425a";
> + ctrl-gpios = <&gpio 40 GPIO_ACTIVE_HIGH>,
> + <&gpio 39 GPIO_ACTIVE_HIGH>,
> + <&gpio 38 GPIO_ACTIVE_HIGH>,
> + <&gpio 37 GPIO_ACTIVE_HIGH>,
> + <&gpio 36 GPIO_ACTIVE_HIGH>,
> + <&gpio 35 GPIO_ACTIVE_HIGH>;
> +
> + vcc-supply = <&foo>;
> + };
> + };
> +...
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-01-27 21:16    [W:0.035 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site