lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 4.19 021/639] ixgbe: dont clear IPsec sa counters on HW clearing
    Date
    From: Shannon Nelson <shannon.nelson@oracle.com>

    [ Upstream commit 9e3f2f5ecee69b0f70003fb3e07639151e91de73 ]

    The software SA record counters should not be cleared when clearing
    the hardware tables. This causes the counters to be out of sync
    after a driver reset.

    Fixes: 63a67fe229ea ("ixgbe: add ipsec offload add and remove SA")
    Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com>
    Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
    Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c | 4 ----
    1 file changed, 4 deletions(-)

    diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
    index b27f7a968820d..49e6d66ccf802 100644
    --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
    +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ipsec.c
    @@ -114,7 +114,6 @@ static void ixgbe_ipsec_set_rx_ip(struct ixgbe_hw *hw, u16 idx, __be32 addr[])
    **/
    static void ixgbe_ipsec_clear_hw_tables(struct ixgbe_adapter *adapter)
    {
    - struct ixgbe_ipsec *ipsec = adapter->ipsec;
    struct ixgbe_hw *hw = &adapter->hw;
    u32 buf[4] = {0, 0, 0, 0};
    u16 idx;
    @@ -133,9 +132,6 @@ static void ixgbe_ipsec_clear_hw_tables(struct ixgbe_adapter *adapter)
    ixgbe_ipsec_set_tx_sa(hw, idx, buf, 0);
    ixgbe_ipsec_set_rx_sa(hw, idx, 0, buf, 0, 0, 0);
    }
    -
    - ipsec->num_rx_sa = 0;
    - ipsec->num_tx_sa = 0;
    }

    /**
    --
    2.20.1


    \
     
     \ /
      Last update: 2020-01-24 12:00    [W:3.608 / U:0.920 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site