lkml.org 
[lkml]   [2020]   [Jan]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH AUTOSEL 5.4 031/107] ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment
Date
From: Anson Huang <Anson.Huang@nxp.com>

[ Upstream commit 4521de30fbb3f5be0db58de93582ebce72c9d44f ]

The vdd3p0 LDO's input should be from external USB VBUS directly, NOT
PMIC's power supply, the vdd3p0 LDO's target output voltage can be
controlled by SW, and it requires input voltage to be high enough, with
incorrect power supply assigned, if the power supply's voltage is lower
than the LDO target output voltage, it will return fail and skip the LDO
voltage adjustment, so remove the power supply assignment for vdd3p0 to
avoid such scenario.

Fixes: 93385546ba36 ("ARM: dts: imx6qdl-sabresd: Assign corresponding power supply for LDOs")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 4 ----
1 file changed, 4 deletions(-)

diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 71ca76a5e4a51..fe59dde41b649 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -749,10 +749,6 @@
vin-supply = <&vgen5_reg>;
};

-&reg_vdd3p0 {
- vin-supply = <&sw2_reg>;
-};
-
&reg_vdd2p5 {
vin-supply = <&vgen5_reg>;
};
--
2.20.1
\
 
 \ /
  Last update: 2020-01-24 15:38    [W:0.212 / U:0.316 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site