lkml.org 
[lkml]   [2020]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH 2/8] mm/damon: Implement region based sampling
Date
On Mon, 20 Jan 2020 17:27:51 +0100 SeongJae Park <sjpark@amazon.com> wrote:

> From: SeongJae Park <sjpark@amazon.de>
>
> This commit implements DAMON's basic access check and region based
> sampling mechanisms.
>
> Basic Access Check
> ------------------
>
> DAMON basically reports what pages are how frequently accessed. Note
> that the frequency is not an absolute number of accesses, but a relative
> frequency among the pages of the target workloads.
>
> Users can control the resolution of the reports by setting two time
> intervals, ``sampling interval`` and ``aggregation interval``. In
> detail, DAMON checks access to each page per ``sampling interval``,
> aggregates the results (counts the number of the accesses to each page),
> and reports the aggregated results per ``aggregation interval``. For
> the access check of each page, DAMON uses the Accessed bits of PTEs.
>
> This is thus similar to common periodic access checks based access
> tracking mechanisms, which overhead is increasing as the size of the
> target process grows.
>
> Region Based Sampling
> ---------------------
>
> To avoid the unbounded increase of the overhead, DAMON groups a number
> of adjacent pages that assumed to have same access frequencies into a
> region. As long as the assumption (pages in a region have same access
> frequencies) is kept, only one page in the region is required to be
> checked. Thus, for each ``sampling interval``, DAMON randomly picks one
> page in each region and clears its Accessed bit. After one more
> ``sampling interval``, DAMON reads the Accessed bit of the page and
> increases the access frequency of the region if the bit has set
> meanwhile. Therefore, the monitoring overhead is controllable by
> setting the number of regions.
>
> Nonetheless, this scheme cannot preserve the quality of the output if
> the assumption is not kept.
>
> Signed-off-by: SeongJae Park <sjpark@amazon.de>
> ---
> mm/damon.c | 599 +++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 599 insertions(+)
>
> diff --git a/mm/damon.c b/mm/damon.c
> index 064ec1f6ded9..2a0c010291f8 100644
> --- a/mm/damon.c
> +++ b/mm/damon.c
> @@ -9,9 +9,14 @@
>
> #define pr_fmt(fmt) "damon: " fmt
> [...]
> +
> +/*
> + * Check whether the given region has accessed since the last check
> + *
> + * mm 'mm_struct' for the given virtual address space
> + * r the region to be checked
> + */
> +static void kdamond_check_access(struct mm_struct *mm, struct damon_region *r)
> +{
> + pte_t *pte = NULL;
> + pmd_t *pmd = NULL;
> + spinlock_t *ptl;
> +
> + if (follow_pte_pmd(mm, r->sampling_addr, NULL, &pte, &pmd, &ptl))
> + goto mkold;
> +
> + /* Read the page table access bit of the page */
> + if (pte && pte_young(*pte))
> + r->nr_accesses++;
> +#ifdef CONFIG_TRANSPARENT_HUGEPAGE
> + else if (pmd && pmd_young(*pmd))
> + r->nr_accesses++;
> +#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
> +
> + spin_unlock(ptl);
> +
> +mkold:
> + /* mkold next target */
> + r->sampling_addr = damon_rand(r->vm_start, r->vm_end);
> +
> + if (follow_pte_pmd(mm, r->sampling_addr, NULL, &pte, &pmd, &ptl))
> + return;
> +
> + if (pte) {
> + if (pte_young(*pte))
> + clear_page_idle(pte_page(*pte));

Yunjae has personally pointed me out that this could interfere with reclamation
logic because page_referenced_one() checks the pte Accessed bits. As the
function also checks PG_Young, we agreed to adjust PG_Young in addition to the
PG_Idle here, as below:

diff --git a/mm/damon.c b/mm/damon.c
index 8067ea916f81..55b89a2c0140 100644
--- a/mm/damon.c
+++ b/mm/damon.c
@@ -491,14 +491,18 @@ static void kdamond_check_access(struct mm_struct *mm, struct damon_region *r)
return;

if (pte) {
- if (pte_young(*pte))
+ if (pte_young(*pte)) {
clear_page_idle(pte_page(*pte));
+ set_page_young(pte_page(*pte));
+ }
*pte = pte_mkold(*pte);
}
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
else if (pmd) {
- if (pmd_young(*pmd))
+ if (pmd_young(*pmd)) {
clear_page_idle(pmd_page(*pmd));
+ set_page_young(pte_page(*pte));
+ }
*pmd = pmd_mkold(*pmd);
}
#endif

This change will be merged into this patch by next spin. Also, adding CC for
page_idle.c related people.


Thanks,
SeongJae Park


> + *pte = pte_mkold(*pte);
> + }
> +#ifdef CONFIG_TRANSPARENT_HUGEPAGE
> + else if (pmd) {
> + if (pmd_young(*pmd))
> + clear_page_idle(pmd_page(*pmd));
> + *pmd = pmd_mkold(*pmd);
> + }
> +#endif
> +
> + spin_unlock(ptl);
> +}
> +
> +/*
> + * Check whether a time interval is elapsed
> + *
> + * baseline the time to check whether the interval has elapsed since
> + * interval the time interval (microseconds)
> + *
> + * See whether the given time interval has passed since the given baseline
> + * time. If so, it also updates the baseline to current time for next check.
> + *
> + * Returns true if the time interval has passed, or false otherwise.
> + */
> +static bool damon_check_reset_time_interval(struct timespec64 *baseline,
> + unsigned long interval)
> +{
> + struct timespec64 now;
> +
> + ktime_get_coarse_ts64(&now);
> + if ((timespec64_to_ns(&now) - timespec64_to_ns(baseline)) / 1000 <
> + interval)
> + return false;
> + *baseline = now;
> + return true;
> +}
> +
> +/*
> + * Check whether it is time to flush the aggregated information
> + */
> +static bool kdamond_aggregate_interval_passed(void)
> +{
> + return damon_check_reset_time_interval(&last_aggregate_time,
> + aggr_interval);
> +}
> +
> +/*
> + * Flush the content in the result buffer to the result file
> + */
> +static void damon_flush_rbuffer(void)
> +{
> + ssize_t sz;
> + loff_t pos;
> + struct file *rfile;
> +
> + while (damon_rbuf_offset) {
> + pos = 0;
> + rfile = filp_open(rfile_path, O_CREAT | O_RDWR | O_APPEND,
> + 0644);
> + if (IS_ERR(rfile)) {
> + pr_err("Cannot open the result file %s\n", rfile_path);
> + return;
> + }
> +
> + sz = kernel_write(rfile, damon_rbuf, damon_rbuf_offset, &pos);
> + filp_close(rfile, NULL);
> +
> + damon_rbuf_offset -= sz;
> + }
> +}
> +
> +/*
> + * Write a data into the result buffer
> + */
> +static void damon_write_rbuf(void *data, ssize_t size)
> +{
> + if (damon_rbuf_offset + size > DAMON_LEN_RBUF)
> + damon_flush_rbuffer();
> +
> + memcpy(&damon_rbuf[damon_rbuf_offset], data, size);
> + damon_rbuf_offset += size;
> +}
> +
> +/*
> + * Flush the aggregated monitoring results to the result buffer
> + *
> + * Stores current tracking results to the result buffer and reset 'nr_accesses'
> + * of each regions. The format for the result buffer is as below:
> + *
> + * <time> <number of tasks> <array of task infos>
> + *
> + * task info: <pid> <number of regions> <array of region infos>
> + * region info: <start address> <end address> <nr_accesses>
> + */
> +static void kdamond_flush_aggregated(void)
> +{
> + struct damon_task *t;
> + struct timespec64 now;
> + unsigned int nr;
> +
> + ktime_get_coarse_ts64(&now);
> +
> + damon_write_rbuf(&now, sizeof(struct timespec64));
> + nr = nr_damon_tasks();
> + damon_write_rbuf(&nr, sizeof(nr));
> +
> + damon_for_each_task(t) {
> + struct damon_region *r;
> +
> + damon_write_rbuf(&t->pid, sizeof(t->pid));
> + nr = nr_damon_regions(t);
> + damon_write_rbuf(&nr, sizeof(nr));
> + damon_for_each_region(r, t) {
> + damon_write_rbuf(&r->vm_start, sizeof(r->vm_start));
> + damon_write_rbuf(&r->vm_end, sizeof(r->vm_end));
> + damon_write_rbuf(&r->nr_accesses,
> + sizeof(r->nr_accesses));
> + r->nr_accesses = 0;
> + }
> + }
> +}
> +
> +/*
> + * Check whether current monitoring should be stopped
> + *
> + * If users asked to stop, need stop. Even though no user has asked to stop,
> + * need stop if every target task has dead.
> + *
> + * Returns true if need to stop current monitoring.
> + */
> +static bool kdamond_need_stop(void)
> +{
> + struct damon_task *t;
> + struct task_struct *task;
> + bool stop;
> +
> + spin_lock(&kdamond_lock);
> + stop = kdamond_stop;
> + spin_unlock(&kdamond_lock);
> + if (stop)
> + return true;
> +
> + damon_for_each_task(t) {
> + task = damon_get_task_struct(t);
> + if (task) {
> + put_task_struct(task);
> + return false;
> + }
> + }
> +
> + return true;
> +}
> +
> +/*
> + * The monitoring daemon that runs as a kernel thread
> + */
> +static int kdamond_fn(void *data)
> +{
> + struct damon_task *t;
> + struct damon_region *r, *next;
> + struct mm_struct *mm;
> +
> + pr_info("kdamond (%d) starts\n", kdamond->pid);
> + kdamond_init_regions();
> + while (!kdamond_need_stop()) {
> + damon_for_each_task(t) {
> + mm = damon_get_mm(t);
> + if (!mm)
> + continue;
> + damon_for_each_region(r, t)
> + kdamond_check_access(mm, r);
> + mmput(mm);
> + }
> +
> + if (kdamond_aggregate_interval_passed())
> + kdamond_flush_aggregated();
> +
> + usleep_range(sample_interval, sample_interval + 1);
> + }
> + damon_flush_rbuffer();
> + damon_for_each_task(t) {
> + damon_for_each_region_safe(r, next, t)
> + damon_destroy_region(r);
> + }
> + pr_info("kdamond (%d) finishes\n", kdamond->pid);
> + spin_lock(&kdamond_lock);
> + kdamond = NULL;
> + spin_unlock(&kdamond_lock);
> + return 0;
> +}
> +
> +/*
> + * Controller functions
> + */
> +
> +/*
> + * Start or stop the kdamond
> + *
> + * Returns 0 if success, negative error code otherwise.
> + */
> +static int damon_turn_kdamond(bool on)
> +{
> + spin_lock(&kdamond_lock);
> + kdamond_stop = !on;
> + if (!kdamond && on) {
> + kdamond = kthread_run(kdamond_fn, NULL, "kdamond");
> + if (!kdamond)
> + goto fail;
> + goto success;
> + }
> + if (kdamond && !on) {
> + spin_unlock(&kdamond_lock);
> + while (true) {
> + spin_lock(&kdamond_lock);
> + if (!kdamond)
> + goto success;
> + spin_unlock(&kdamond_lock);
> +
> + usleep_range(sample_interval, sample_interval * 2);
> + }
> + }
> +
> + /* tried to turn on while turned on, or turn off while turned off */
> +
> +fail:
> + spin_unlock(&kdamond_lock);
> + return -EINVAL;
> +
> +success:
> + spin_unlock(&kdamond_lock);
> + return 0;
> +}
> +
> +static inline bool damon_is_target_pid(unsigned long pid)
> +{
> + struct damon_task *t;
> +
> + damon_for_each_task(t) {
> + if (t->pid == pid)
> + return true;
> + }
> + return false;
> +}
> +
> +/*
> + * This function should not be called while the kdamond is running.
> + */
> +static long damon_set_pids(unsigned long *pids, ssize_t nr_pids)
> +{
> + ssize_t i;
> + struct damon_task *t, *next;
> +
> + /* Remove unselected tasks */
> + damon_for_each_task_safe(t, next) {
> + for (i = 0; i < nr_pids; i++) {
> + if (pids[i] == t->pid)
> + break;
> + }
> + if (i != nr_pids)
> + continue;
> + damon_destroy_task(t);
> + }
> +
> + /* Add new tasks */
> + for (i = 0; i < nr_pids; i++) {
> + if (damon_is_target_pid(pids[i]))
> + continue;
> + t = damon_new_task(pids[i]);
> + if (!t) {
> + pr_err("Failed to alloc damon_task\n");
> + return -ENOMEM;
> + }
> + damon_add_task_tail(t);
> + }
> +
> + return 0;
> +}
> +
> +/*
> + * Set attributes for the monitoring
> + *
> + * sample_int time interval between samplings
> + * aggr_int time interval between aggregations
> + * min_nr_reg minimal number of regions
> + * path_to_rfile path to the monitor result files
> + *
> + * This function should not be called while the kdamond is running.
> + * Every time interval is in micro-seconds.
> + *
> + * Returns 0 on success, negative error code otherwise.
> + */
> +static long damon_set_attrs(unsigned long sample_int, unsigned long aggr_int,
> + unsigned long min_nr_reg, char *path_to_rfile)
> +{
> + if (strnlen(path_to_rfile, LEN_RES_FILE_PATH) >= LEN_RES_FILE_PATH) {
> + pr_err("too long (>%d) result file path %s\n",
> + LEN_RES_FILE_PATH, path_to_rfile);
> + return -EINVAL;
> + }
> + if (min_nr_reg < 3) {
> + pr_err("min_nr_regions (%lu) should be bigger than 2\n",
> + min_nr_reg);
> + return -EINVAL;
> + }
> +
> + sample_interval = sample_int;
> + aggr_interval = aggr_int;
> + min_nr_regions = min_nr_reg;
> + strncpy(rfile_path, path_to_rfile, LEN_RES_FILE_PATH);
> + return 0;
> +}
> +
> static int __init damon_init(void)
> {
> pr_info("init\n");
>
> prandom_seed_state(&rndseed, 42);
> + ktime_get_coarse_ts64(&last_aggregate_time);
> return 0;
> }
>
> static void __exit damon_exit(void)
> {
> + damon_turn_kdamond(false);
> pr_info("exit\n");
> }
>
> --
> 2.17.1
>

\
 
 \ /
  Last update: 2020-01-22 09:17    [W:0.142 / U:0.584 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site