lkml.org 
[lkml]   [2020]   [Jan]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] Documentation: ABI: testing: ad7192: update sysfs docs
Date
Updated mainline documentation on ad7192 userspace sysfs.

Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
---
.../ABI/testing/sysfs-bus-iio-adc-ad7192 | 17 ++++++++++------
.../iio/Documentation/sysfs-bus-iio-ad7192 | 20 -------------------
2 files changed, 11 insertions(+), 26 deletions(-)
delete mode 100644 drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192

diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192 b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
index 7627d3be08f5..9be6b8a69a19 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7192
@@ -2,17 +2,22 @@ What: /sys/bus/iio/devices/iio:deviceX/ac_excitation_en
KernelVersion:
Contact: linux-iio@vger.kernel.org
Description:
- Reading gives the state of AC excitation.
- Writing '1' enables AC excitation.
+ This attribute, if available, is used to enable the AC
+ excitation mode found on some converters. In ac excitation mode,
+ the polarity of the excitation voltage is reversed on
+ alternate cycles, to eliminate DC errors.

What: /sys/bus/iio/devices/iio:deviceX/bridge_switch_en
KernelVersion:
Contact: linux-iio@vger.kernel.org
Description:
- This bridge switch is used to disconnect it when there is a
- need to minimize the system current consumption.
- Reading gives the state of the bridge switch.
- Writing '1' enables the bridge switch.
+ This attribute, if available, is used to close or open the
+ bridge power down switch found on some converters.
+ In bridge applications, such as strain gauges and load cells,
+ the bridge itself consumes the majority of the current in the
+ system. To minimize the current consumption of the system,
+ the bridge can be disconnected (when it is not being used
+ using the bridge_switch_en attribute.

What: /sys/bus/iio/devices/iio:deviceX/in_voltagex_sys_calibration
KernelVersion:
diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192 b/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
deleted file mode 100644
index 1c35c507cc05..000000000000
--- a/drivers/staging/iio/Documentation/sysfs-bus-iio-ad7192
+++ /dev/null
@@ -1,20 +0,0 @@
-What: /sys/.../iio:deviceX/ac_excitation_en
-KernelVersion: 3.1.0
-Contact: linux-iio@vger.kernel.org
-Description:
- This attribute, if available, is used to enable the AC
- excitation mode found on some converters. In ac excitation mode,
- the polarity of the excitation voltage is reversed on
- alternate cycles, to eliminate DC errors.
-
-What: /sys/.../iio:deviceX/bridge_switch_en
-KernelVersion: 3.1.0
-Contact: linux-iio@vger.kernel.org
-Description:
- This attribute, if available, is used to close or open the
- bridge power down switch found on some converters.
- In bridge applications, such as strain gauges and load cells,
- the bridge itself consumes the majority of the current in the
- system. To minimize the current consumption of the system,
- the bridge can be disconnected (when it is not being used
- using the bridge_switch_en attribute.
--
2.20.1
\
 
 \ /
  Last update: 2020-01-22 15:38    [W:0.204 / U:0.056 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site