lkml.org 
[lkml]   [2020]   [Jan]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net v2 1/9] r8152: fix runtime resume for linking change
Date
Fix the runtime resume doesn't work normally for linking change.

1. Reset the settings and status of runtime suspend.
2. Sync the linking status.
3. Poll the linking change.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
drivers/net/usb/r8152.c | 21 +++++++++++++++++++++
1 file changed, 21 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 031cb8fff909..115559707683 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -365,8 +365,10 @@
#define DEBUG_LTSSM 0x0082

/* PLA_EXTRA_STATUS */
+#define CUR_LINK_OK BIT(15)
#define U3P3_CHECK_EN BIT(7) /* RTL_VER_05 only */
#define LINK_CHANGE_FLAG BIT(8)
+#define POLL_LINK_CHG BIT(0)

/* USB_USB2PHY */
#define USB2PHY_SUSPEND 0x0001
@@ -5387,6 +5389,16 @@ static void r8153_init(struct r8152 *tp)
else
ocp_data |= DYNAMIC_BURST;
ocp_write_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY1, ocp_data);
+
+ r8153_queue_wake(tp, false);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+ if (rtl8152_get_speed(tp) & LINK_STATUS)
+ ocp_data |= CUR_LINK_OK;
+ else
+ ocp_data &= ~CUR_LINK_OK;
+ ocp_data |= POLL_LINK_CHG;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
}

ocp_data = ocp_read_byte(tp, MCU_TYPE_USB, USB_CSR_DUMMY2);
@@ -5416,6 +5428,7 @@ static void r8153_init(struct r8152 *tp)
ocp_write_word(tp, MCU_TYPE_USB, USB_CONNECT_TIMER, 0x0001);

r8153_power_cut_en(tp, false);
+ rtl_runtime_suspend_enable(tp, false);
r8153_u1u2en(tp, true);
r8153_mac_clk_spd(tp, false);
usb_enable_lpm(tp->udev);
@@ -5484,6 +5497,14 @@ static void r8153b_init(struct r8152 *tp)
r8153b_ups_en(tp, false);
r8153_queue_wake(tp, false);
rtl_runtime_suspend_enable(tp, false);
+
+ ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS);
+ if (rtl8152_get_speed(tp) & LINK_STATUS)
+ ocp_data |= CUR_LINK_OK;
+ else
+ ocp_data &= ~CUR_LINK_OK;
+ ocp_data |= POLL_LINK_CHG;
+ ocp_write_word(tp, MCU_TYPE_PLA, PLA_EXTRA_STATUS, ocp_data);
r8153b_u1u2en(tp, true);
usb_enable_lpm(tp->udev);

--
2.21.0
\
 
 \ /
  Last update: 2020-01-22 02:43    [W:0.418 / U:0.760 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site