lkml.org 
[lkml]   [2020]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 14/26] docs: i2c: smbus-protocol: use proper names for ACK and NACK
On Sun,  5 Jan 2020 23:50:00 +0100, Luca Ceresoli wrote:
> Use the proper ACK and NACK naming from the I2C specification instead of
> "accept" and "reverse accept".
>
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
> ---
> Documentation/i2c/smbus-protocol.rst | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
> index fbadd4d25ad5..10c4a989982c 100644
> --- a/Documentation/i2c/smbus-protocol.rst
> +++ b/Documentation/i2c/smbus-protocol.rst
> @@ -38,7 +38,7 @@ Key to symbols
> S Start condition
> P Stop condition
> Rd/Wr (1 bit) Read/Write bit. Rd equals 1, Wr equals 0.
> -A, NA (1 bit) Accept and reverse accept bit.
> +A, NA (1 bit) Acknowledge (ACK) and Not Acknowledge (NACK) bit
> Addr (7 bits) I2C 7 bit address. Note that this can be expanded as usual to
> get a 10 bit I2C address.
> Comm (8 bits) Command byte, a data byte which often selects a register on

Reviewed-by: Jean Delvare <jdelvare@suse.de>

--
Jean Delvare
SUSE L3 Support

\
 
 \ /
  Last update: 2020-01-20 15:26    [W:0.249 / U:0.948 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site