lkml.org 
[lkml]   [2020]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 12/26] docs: i2c: smbus-protocol: properly name start and stop conditions
On Sun,  5 Jan 2020 23:49:58 +0100, Luca Ceresoli wrote:
> In I2C there is no such thing as a "start bit" or a "stop bit". Use the
> proper naming: "start condition" and "stop condition".
>
> Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
> ---
> Documentation/i2c/smbus-protocol.rst | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/i2c/smbus-protocol.rst b/Documentation/i2c/smbus-protocol.rst
> index 1600b09ec0be..8510eeda1dd0 100644
> --- a/Documentation/i2c/smbus-protocol.rst
> +++ b/Documentation/i2c/smbus-protocol.rst
> @@ -35,8 +35,8 @@ Key to symbols
> ==============
>
> =============== =============================================================
> -S (1 bit) : Start bit
> -P (1 bit) : Stop bit
> +S : Start condition
> +P : Stop condition
> Rd/Wr (1 bit) : Read/Write bit. Rd equals 1, Wr equals 0.
> A, NA (1 bit) : Accept and reverse accept bit.
> Addr (7 bits): I2C 7 bit address. Note that this can be expanded as usual to

Reviewed-by: Jean Delvare <jdelvare@suse.de>

--
Jean Delvare
SUSE L3 Support

\
 
 \ /
  Last update: 2020-01-20 15:17    [W:0.345 / U:7.520 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site