lkml.org 
[lkml]   [2020]   [Jan]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] media: rcar_drif: Use dma_request_chan() instead dma_request_slave_channel()
From
Date


On 20/01/2020 14.36, Geert Uytterhoeven wrote:
> Hi Peter,
>
> On Mon, Jan 20, 2020 at 1:09 PM Peter Ujfalusi <peter.ujfalusi@ti.com> wrote:
>> On 20/01/2020 14.05, Geert Uytterhoeven wrote:
>>> On Tue, Dec 17, 2019 at 11:41 AM Peter Ujfalusi <peter.ujfalusi@ti.com> wrote:
>>>> dma_request_slave_channel() is a wrapper on top of dma_request_chan()
>>>> eating up the error code.
>>>>
>>>> By using dma_request_chan() directly the driver can support deferred
>>>> probing against DMA.
>>>>
>>>> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
>>>
>>> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
>>>
>>> One comment below.
>>>
>>>> --- a/drivers/media/platform/rcar_drif.c
>>>> +++ b/drivers/media/platform/rcar_drif.c
>>>> @@ -275,10 +275,10 @@ static int rcar_drif_alloc_dmachannels(struct rcar_drif_sdr *sdr)
>>>> for_each_rcar_drif_channel(i, &sdr->cur_ch_mask) {
>>>> struct rcar_drif *ch = sdr->ch[i];
>>>>
>>>> - ch->dmach = dma_request_slave_channel(&ch->pdev->dev, "rx");
>>>> - if (!ch->dmach) {
>>>> + ch->dmach = dma_request_chan(&ch->pdev->dev, "rx");
>>>> + if (IS_ERR(ch->dmach)) {
>>>> rdrif_err(sdr, "ch%u: dma channel req failed\n", i);
>>>
>>> Now there is an error code, you might (1) want to print it, and (2) only
>>> do so when it is not due to probe deferral:
>>>
>>> if (PTR_ERR(ch->dmach) != -EPROBE_DEFER)
>>> rdrif_err(sdr, "ch%u: dma channel req failed %pe\n",
>>> i, ch->dmach);
>>
>> Yes, this is true.
>>
>>>
>>>> - ret = -ENODEV;
>>>> + ret = PTR_ERR(ch->dmach);
>>
>> if (ret != -EPROBE_DEFER)
>> rdrif_err(sdr, "ch%u: dma channel req failed (%d)\n", i, ret);
>>
>> might be simpler.
>
> Sure, checking ret is simpler.
> But printing ch->dmach means you can use the new %pe format specifier
> to pretty-print the error code.

Ah, I was not aware of this, but there is another issue with the patch:
I need to set the ch->dmach to NULL before jumping to dmach_error..

I'll send v3 in a minute.

>
> Gr{oetje,eeting}s,
>
> Geert
>

- Péter

Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

\
 
 \ /
  Last update: 2020-01-20 13:45    [W:0.116 / U:0.024 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site