lkml.org 
[lkml]   [2020]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 7/9] arm64: dts: sdm845: thermal: Add critical interrupt support
On Thu 02 Jan 06:54 PST 2020, Amit Kucheria wrote:

> Register critical interrupts for each of the two tsens controllers
>
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Link: https://lore.kernel.org/r/3686bd40c99692feb955e936b608b080e2cb1826.1568624011.git.amit.kucheria@linaro.org

I was under the impression that this series was already picked up, so I
merged the three dts patches last week (it's a nop until the driver is
updated anyways).

Regards,
Bjorn

> ---
> arch/arm64/boot/dts/qcom/sdm845.dtsi | 10 ++++++----
> 1 file changed, 6 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> index ddb1f23c936f..8986553cf2eb 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
> @@ -2950,8 +2950,9 @@
> reg = <0 0x0c263000 0 0x1ff>, /* TM */
> <0 0x0c222000 0 0x1ff>; /* SROT */
> #qcom,sensors = <13>;
> - interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow";
> + interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow", "critical";
> #thermal-sensor-cells = <1>;
> };
>
> @@ -2960,8 +2961,9 @@
> reg = <0 0x0c265000 0 0x1ff>, /* TM */
> <0 0x0c223000 0 0x1ff>; /* SROT */
> #qcom,sensors = <8>;
> - interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
> - interrupt-names = "uplow";
> + interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "uplow", "critical";
> #thermal-sensor-cells = <1>;
> };
>
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2020-01-02 20:58    [W:0.132 / U:25.172 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site