lkml.org 
[lkml]   [2020]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 3/9] drivers: thermal: tsens: use simpler variables
On Thu 02 Jan 06:54 PST 2020, Amit Kucheria wrote:

> We already dereference the sensor and save it into a variable. Use the
> variable directly to make the code easier to read.
>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
> drivers/thermal/qcom/tsens-common.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> index c2df30a08b9e..1cbc5a6e5b4f 100644
> --- a/drivers/thermal/qcom/tsens-common.c
> +++ b/drivers/thermal/qcom/tsens-common.c
> @@ -368,7 +368,7 @@ irqreturn_t tsens_irq_thread(int irq, void *data)
> tsens_set_interrupt(priv, hw_id, UPPER, disable);
> if (d.up_thresh > temp) {
> dev_dbg(priv->dev, "[%u] %s: re-arm upper\n",
> - priv->sensor[i].hw_id, __func__);
> + hw_id, __func__);
> tsens_set_interrupt(priv, hw_id, UPPER, enable);
> } else {
> trigger = true;
> @@ -379,7 +379,7 @@ irqreturn_t tsens_irq_thread(int irq, void *data)
> tsens_set_interrupt(priv, hw_id, LOWER, disable);
> if (d.low_thresh < temp) {
> dev_dbg(priv->dev, "[%u] %s: re-arm low\n",
> - priv->sensor[i].hw_id, __func__);
> + hw_id, __func__);
> tsens_set_interrupt(priv, hw_id, LOWER, enable);
> } else {
> trigger = true;
> @@ -392,7 +392,7 @@ irqreturn_t tsens_irq_thread(int irq, void *data)
> if (trigger) {
> dev_dbg(priv->dev, "[%u] %s: TZ update trigger (%d mC)\n",
> hw_id, __func__, temp);
> - thermal_zone_device_update(priv->sensor[i].tzd,
> + thermal_zone_device_update(s->tzd,
> THERMAL_EVENT_UNSPECIFIED);
> } else {
> dev_dbg(priv->dev, "[%u] %s: no violation: %d\n",
> @@ -435,7 +435,7 @@ int tsens_set_trips(void *_sensor, int low, int high)
> spin_unlock_irqrestore(&priv->ul_lock, flags);
>
> dev_dbg(dev, "[%u] %s: (%d:%d)->(%d:%d)\n",
> - s->hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
> + hw_id, __func__, d.low_thresh, d.up_thresh, cl_low, cl_high);
>
> return 0;
> }
> --
> 2.20.1
>

\
 
 \ /
  Last update: 2020-01-02 20:19    [W:0.104 / U:0.116 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site