lkml.org 
[lkml]   [2020]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH] clk: at91: add sama5d3 pmc driver
Date
On 2019-12-29 21:29, Alexandre Belloni <alexandre.belloni@bootlin.com> wrote:
> Add a driver for the PMC clocks of the sama5d3.
>
> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

The datasheet lists the maximum peripheral clock frequencies in terms of
MCK dividers, and for those of us using MCK = 134 MHz instead of 133 MHz,
the .max values will make the peripherals run at half the possible clock.
Could we use .max values based on 134 MHz instead? Or based on 166 MHz
which is the maximum allowed MCK?

See also comments inline.

Thanks,
Karl Olsen

> ---
> drivers/clk/at91/Makefile | 1 +
> drivers/clk/at91/sama5d3.c | 236 +++++++++++++++++++++++++++++++++++++
> 2 files changed, 237 insertions(+)
> create mode 100644 drivers/clk/at91/sama5d3.c
>
> diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
> index 3732241352ce..e3be7f40f79e 100644
> --- a/drivers/clk/at91/Makefile
> +++ b/drivers/clk/at91/Makefile
> @@ -17,5 +17,6 @@ obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK) += clk-i2s-mux.o
> obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL) += clk-sam9x60-pll.o
> obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
> obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
> +obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
> obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
> obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
> diff --git a/drivers/clk/at91/sama5d3.c b/drivers/clk/at91/sama5d3.c
> new file mode 100644
> index 000000000000..0b73c174ab56
> --- /dev/null
> +++ b/drivers/clk/at91/sama5d3.c
> @@ -0,0 +1,236 @@
> +// SPDX-License-Identifier: GPL-2.0
> +#include <linux/clk-provider.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/slab.h>
> +
> +#include <dt-bindings/clock/at91.h>
> +
> +#include "pmc.h"
> +
> +static const struct clk_master_characteristics mck_characteristics = {
> + .output = { .min = 0, .max = 166000000 },
> + .divisors = { 1, 2, 4, 3 },
> +};
> +
> +static u8 plla_out[] = { 0 };
> +
> +static u16 plla_icpll[] = { 0 };
> +
> +static const struct clk_range plla_outputs[] = {
> + { .min = 400000000, .max = 1000000000 },
> +};
> +
> +static const struct clk_pll_characteristics plla_characteristics = {
> + .input = { .min = 8000000, .max = 50000000 },
> + .num_output = ARRAY_SIZE(plla_outputs),
> + .output = plla_outputs,
> + .icpll = plla_icpll,
> + .out = plla_out,
> +};
> +
> +static const struct clk_pcr_layout sama5d3_pcr_layout = {
> + .offset = 0x10c,
> + .cmd = BIT(12),
> + .pid_mask = GENMASK(6, 0),
> + .div_mask = GENMASK(17, 16),
> +};
> +
> +static const struct {
> + char *n;
> + char *p;
> + u8 id;
> +} sama5d3_systemck[] = {
> + { .n = "ddrck", .p = "masterck", .id = 2 },
> + { .n = "lcdck", .p = "masterck", .id = 3 },
> + { .n = "smdck", .p = "smdclk", .id = 4 },
> + { .n = "uhpck", .p = "usbck", .id = 6 },
> + { .n = "udpck", .p = "usbck", .id = 7 },
> + { .n = "pck0", .p = "prog0", .id = 8 },
> + { .n = "pck1", .p = "prog1", .id = 9 },
> + { .n = "pck2", .p = "prog2", .id = 10 },
> +};
> +
> +static const struct {
> + char *n;
> + u8 id;
> + struct clk_range r;
> +} sama5d3_periphck[] = {
> + { .n = "dbgu_clk", .id = 2, },
> + { .n = "hsmc_clk", .id = 5, },
> + { .n = "pioA_clk", .id = 6, },
> + { .n = "pioB_clk", .id = 7, },
> + { .n = "pioC_clk", .id = 8, },
> + { .n = "pioD_clk", .id = 9, },
> + { .n = "pioE_clk", .id = 10, },
> + { .n = "usart0_clk", .id = 12, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "usart1_clk", .id = 13, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "usart2_clk", .id = 14, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "usart3_clk", .id = 15, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "uart0_clk", .id = 16, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "uart1_clk", .id = 17, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "twi0_clk", .id = 18, .r = { .min = 0, .max = 16625000 }, },
> + { .n = "twi1_clk", .id = 19, .r = { .min = 0, .max = 16625000 }, },
> + { .n = "twi2_clk", .id = 20, .r = { .min = 0, .max = 16625000 }, },

The datasheet says max freq for TWI is MCK/4, not MCK/8.

> + { .n = "mci0_clk", .id = 21, },
> + { .n = "mci1_clk", .id = 22, },
> + { .n = "mci2_clk", .id = 23, },
> + { .n = "spi0_clk", .id = 24, .r = { .min = 0, .max = 133000000 }, },
> + { .n = "spi1_clk", .id = 25, .r = { .min = 0, .max = 133000000 }, },
> + { .n = "tcb0_clk", .id = 26, .r = { .min = 0, .max = 133000000 }, },
> + { .n = "tcb1_clk", .id = 27, },

tcb1_clk should also have .min and .max?

> + { .n = "pwm_clk", .id = 28, },
> + { .n = "adc_clk", .id = 29, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "dma0_clk", .id = 30, },
> + { .n = "dma1_clk", .id = 31, },
> + { .n = "uhphs_clk", .id = 32, },
> + { .n = "udphs_clk", .id = 33, },
> + { .n = "macb0_clk", .id = 34, },
> + { .n = "macb1_clk", .id = 35, },
> + { .n = "lcdc_clk", .id = 36, },
> + { .n = "isi_clk", .id = 37, },
> + { .n = "ssc0_clk", .id = 38, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "ssc1_clk", .id = 39, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "can0_clk", .id = 40, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "can1_clk", .id = 41, .r = { .min = 0, .max = 66000000 }, },
> + { .n = "sha_clk", .id = 42, },
> + { .n = "aes_clk", .id = 43, },
> + { .n = "tdes_clk", .id = 44, },
> + { .n = "trng_clk", .id = 45, },
> + { .n = "fuse_clk", .id = 48, },
> + { .n = "mpddr_clk", .id = 49, },
> +};
> +
> +static void __init sama5d3_pmc_setup(struct device_node *np)
> +{
> + const char *slck_name, *mainxtal_name;
> + struct pmc_data *sama5d3_pmc;
> + const char *parent_names[5];
> + struct regmap *regmap;
> + struct clk_hw *hw;
> + int i;
> + bool bypass;
> +
> + i = of_property_match_string(np, "clock-names", "slow_clk");
> + if (i < 0)
> + return;
> +
> + slck_name = of_clk_get_parent_name(np, i);
> +
> + i = of_property_match_string(np, "clock-names", "main_xtal");
> + if (i < 0)
> + return;
> + mainxtal_name = of_clk_get_parent_name(np, i);
> +
> + regmap = syscon_node_to_regmap(np);
> + if (IS_ERR(regmap))
> + return;
> +
> + sama5d3_pmc = pmc_data_allocate(PMC_MAIN + 1,
> + nck(sama5d3_systemck),
> + nck(sama5d3_periphck), 0);
> + if (!sama5d3_pmc)
> + return;
> +
> + hw = at91_clk_register_main_rc_osc(regmap, "main_rc_osc", 12000000,
> + 50000000);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + bypass = of_property_read_bool(np, "atmel,osc-bypass");
> +
> + hw = at91_clk_register_main_osc(regmap, "main_osc", mainxtal_name,
> + bypass);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + parent_names[0] = "main_rc_osc";
> + parent_names[1] = "main_osc";
> + hw = at91_clk_register_sam9x5_main(regmap, "mainck", parent_names, 2);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + hw = at91_clk_register_pll(regmap, "pllack", "mainck", 0,
> + &sama5d3_pll_layout, &plla_characteristics);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + hw = at91_clk_register_plldiv(regmap, "plladivck", "pllack");
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + hw = at91_clk_register_utmi(regmap, NULL, "utmick", "mainck");
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + sama5d3_pmc->chws[PMC_UTMI] = hw;
> +
> + parent_names[0] = slck_name;
> + parent_names[1] = "mainck";
> + parent_names[2] = "plladivck";
> + parent_names[3] = "utmick";
> + hw = at91_clk_register_master(regmap, "masterck", 4, parent_names,
> + &at91sam9x5_master_layout,
> + &mck_characteristics);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + sama5d3_pmc->chws[PMC_MCK] = hw;
> +
> + parent_names[0] = "plladivck";
> + parent_names[1] = "utmick";
> + hw = at91sam9x5_clk_register_usb(regmap, "usbck", parent_names, 2);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + hw = at91sam9x5_clk_register_smd(regmap, "smdclk", parent_names, 2);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + parent_names[0] = slck_name;
> + parent_names[1] = "mainck";
> + parent_names[2] = "plladivck";
> + parent_names[3] = "utmick";
> + parent_names[4] = "masterck";
> + for (i = 0; i < 3; i++) {
> + char name[6];
> +
> + snprintf(name, sizeof(name), "prog%d", i);
> +
> + hw = at91_clk_register_programmable(regmap, name,
> + parent_names, 5, i,
> + &at91sam9x5_programmable_layout);
> + if (IS_ERR(hw))
> + goto err_free;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(sama5d3_systemck); i++) {
> + hw = at91_clk_register_system(regmap, sama5d3_systemck[i].n,
> + sama5d3_systemck[i].p,
> + sama5d3_systemck[i].id);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + sama5d3_pmc->shws[sama5d3_systemck[i].id] = hw;
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(sama5d3_periphck); i++) {
> + hw = at91_clk_register_sam9x5_peripheral(regmap, &pmc_pcr_lock,
> + &sama5d3_pcr_layout,
> + sama5d3_periphck[i].n,
> + "masterck",
> + sama5d3_periphck[i].id,
> + &sama5d3_periphck[i].r);
> + if (IS_ERR(hw))
> + goto err_free;
> +
> + sama5d3_pmc->phws[sama5d3_periphck[i].id] = hw;
> + }
> +
> + of_clk_add_hw_provider(np, of_clk_hw_pmc_get, sama5d3_pmc);
> +
> + return;
> +
> +err_free:
> + pmc_data_free(sama5d3_pmc);
> +}
> +CLK_OF_DECLARE_DRIVER(sama5d3_pmc, "atmel,sama5d3-pmc", sama5d3_pmc_setup);
> --
> 2.23.0

\
 
 \ /
  Last update: 2020-01-02 12:53    [W:0.041 / U:7.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site