lkml.org 
[lkml]   [2020]   [Jan]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v2 3/5] drm/i915/dsi: Init panel-enable GPIO to low when the LCD is initially off (v2)
Date
On Mon, 16 Dec 2019, Hans de Goede <hdegoede@redhat.com> wrote:
> When the LCD has not been turned on by the firmware/GOP, because e.g. the
> device was booted with an external monitor connected over HDMI, we should
> not turn on the panel-enable GPIO when we request it.
>
> Turning on the panel-enable GPIO when we request it, means we turn it on
> too early in the init-sequence, which causes some panels to not correctly
> light up.
>
> This commits adds a panel_is_on parameter to intel_dsi_vbt_gpio_init()
> and makes intel_dsi_vbt_gpio_init() set the initial GPIO value accordingly.
>
> This fixes the panel not lighting up on a Thundersoft TST168 tablet when
> booted with an external monitor connected over HDMI.
>
> Changes in v2:
> - Call intel_dsi_get_hw_state() to check if the panel is on instead of
> relying on the current_mode pointer
>
> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
> ---
> drivers/gpu/drm/i915/display/intel_dsi.h | 2 +-
> drivers/gpu/drm/i915/display/intel_dsi_vbt.c | 7 +++----
> drivers/gpu/drm/i915/display/vlv_dsi.c | 4 +++-
> 3 files changed, 7 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi.h b/drivers/gpu/drm/i915/display/intel_dsi.h
> index de7e51cd3460..675771ea91aa 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi.h
> +++ b/drivers/gpu/drm/i915/display/intel_dsi.h
> @@ -203,7 +203,7 @@ void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port);
>
> /* intel_dsi_vbt.c */
> bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id);
> -void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi);
> +void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on);
> void intel_dsi_vbt_gpio_cleanup(struct intel_dsi *intel_dsi);
> void intel_dsi_vbt_exec_sequence(struct intel_dsi *intel_dsi,
> enum mipi_seq seq_id);
> diff --git a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> index 8be7d6c507aa..4210f449553e 100644
> --- a/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> +++ b/drivers/gpu/drm/i915/display/intel_dsi_vbt.c
> @@ -688,17 +688,16 @@ bool intel_dsi_vbt_init(struct intel_dsi *intel_dsi, u16 panel_id)
> * On some BYT/CHT devs some sequences are incomplete and we need to manually
> * control some GPIOs.
> */
> -void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi)
> +void intel_dsi_vbt_gpio_init(struct intel_dsi *intel_dsi, bool panel_is_on)
> {
> struct drm_device *dev = intel_dsi->base.base.dev;
> struct drm_i915_private *dev_priv = to_i915(dev);
> struct mipi_config *mipi_config = dev_priv->vbt.dsi.config;
> + enum gpiod_flags flags = panel_is_on ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
>
> if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
> mipi_config->pwm_blc == PPS_BLC_PMIC) {
> - intel_dsi->gpio_panel =
> - gpiod_get(dev->dev, "panel", GPIOD_OUT_HIGH);
> -
> + intel_dsi->gpio_panel = gpiod_get(dev->dev, "panel", flags);
> if (IS_ERR(intel_dsi->gpio_panel)) {
> DRM_ERROR("Failed to own gpio for panel control\n");
> intel_dsi->gpio_panel = NULL;
> diff --git a/drivers/gpu/drm/i915/display/vlv_dsi.c b/drivers/gpu/drm/i915/display/vlv_dsi.c
> index c1edd8857af0..d0efee09c593 100644
> --- a/drivers/gpu/drm/i915/display/vlv_dsi.c
> +++ b/drivers/gpu/drm/i915/display/vlv_dsi.c
> @@ -1759,6 +1759,7 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
> struct drm_connector *connector;
> struct drm_display_mode *current_mode, *fixed_mode;
> enum port port;
> + enum pipe pipe;
>
> DRM_DEBUG_KMS("\n");
>
> @@ -1857,7 +1858,8 @@ void vlv_dsi_init(struct drm_i915_private *dev_priv)
>
> vlv_dphy_param_init(intel_dsi);
>
> - intel_dsi_vbt_gpio_init(intel_dsi);
> + intel_dsi_vbt_gpio_init(intel_dsi,
> + intel_dsi_get_hw_state(intel_encoder, &pipe));

Feels a bit scary to call into the hooks before everything is
initialized, but this seems safe. Fingers crossed.

Reviewed-by: Jani Nikula <jani.nikula@intel.com>


>
> drm_connector_init(dev, connector, &intel_dsi_connector_funcs,
> DRM_MODE_CONNECTOR_DSI);

--
Jani Nikula, Intel Open Source Graphics Center

\
 
 \ /
  Last update: 2020-01-02 10:21    [W:0.075 / U:0.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site