lkml.org 
[lkml]   [2020]   [Jan]   [17]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 2/2] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}
Date
Add microchip,sam9x60-usart and add microchip,sam9x60-dbgu to DT
bindings documentation.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---

Hi Lee,

Between version 3 (that you Acked-for-MFD-by) and this one, there is a
new line introduced in this patch:

+ - "microchip,sam9x60-usart"

I kept your Acked-for-MFD-by in this version (with the extra line).
Tell me if you consider otherwise.

Thank you,
Claudiu Beznea

Documentation/devicetree/bindings/mfd/atmel-usart.txt | 2 ++
1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 614a14b5d205..a09133066aff 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -4,8 +4,10 @@ Required properties for USART:
- compatible: Should be one of the following:
- "atmel,at91rm9200-usart"
- "atmel,at91sam9260-usart"
+ - "microchip,sam9x60-usart"
- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
+ - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
- reg: Should contain registers location and length
- interrupts: Should contain interrupt
- clock-names: tuple listing input clock names.
--
2.7.4
\
 
 \ /
  Last update: 2020-01-17 12:59    [W:0.068 / U:0.052 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site