lkml.org 
[lkml]   [2020]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH AUTOSEL 5.4 097/205] ARM: dts: imx6ul-kontron-n6310-s: Disable the snvs-poweroff driver
    Date
    From: Frieder Schrempf <frieder.schrempf@kontron.de>

    [ Upstream commit 0ccafdf3e81bb40fe415ea13e1f42b19c585f0a0 ]

    The snvs-poweroff driver can power off the system by pulling the
    PMIC_ON_REQ signal low, to let the PMIC disable the power.
    The Kontron SoMs do not have this signal connected, so let's remove
    the node.

    This fixes a real issue when the signal is asserted at poweroff,
    but not actually causing the power to turn off. It was observed,
    that in this case the system would not shut down properly.

    Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
    Fixes: 1ea4b76cdfde ("ARM: dts: imx6ul-kontron-n6310: Add Kontron i.MX6UL N6310 SoM and boards")
    Signed-off-by: Shawn Guo <shawnguo@kernel.org>
    Signed-off-by: Sasha Levin <sashal@kernel.org>
    ---
    arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts | 4 ----
    1 file changed, 4 deletions(-)

    diff --git a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
    index 0205fd56d975..4e99e6c79a68 100644
    --- a/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
    +++ b/arch/arm/boot/dts/imx6ul-kontron-n6310-s.dts
    @@ -157,10 +157,6 @@
    status = "okay";
    };

    -&snvs_poweroff {
    - status = "okay";
    -};
    -
    &uart1 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_uart1>;
    --
    2.20.1
    \
     
     \ /
      Last update: 2020-01-16 17:53    [W:3.488 / U:0.492 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site