lkml.org 
[lkml]   [2020]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 5.4 089/203] platform/x86: GPD pocket fan: Use default values when wrong modparams are given
Date
From: Hans de Goede <hdegoede@redhat.com>

commit 6ae01050e49f0080ae30575d9b45a6d4a3d7ee23 upstream.

Use our default values when wrong module-parameters are given, instead of
refusing to load. Refusing to load leaves the fan at the BIOS default
setting, which is "Off". The CPU's thermal throttling should protect the
system from damage, but not-loading is really not the best fallback in this
case.

This commit fixes this by re-setting module-parameter values to their
defaults if they are out of range, instead of failing the probe with
-EINVAL.

Cc: stable@vger.kernel.org
Cc: Jason Anderson <jasona.594@gmail.com>
Reported-by: Jason Anderson <jasona.594@gmail.com>
Fixes: 594ce6db326e ("platform/x86: GPD pocket fan: Use a min-speed of 2 while charging")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
drivers/platform/x86/gpd-pocket-fan.c | 25 +++++++++++++++++++------
1 file changed, 19 insertions(+), 6 deletions(-)

--- a/drivers/platform/x86/gpd-pocket-fan.c
+++ b/drivers/platform/x86/gpd-pocket-fan.c
@@ -16,17 +16,27 @@

#define MAX_SPEED 3

-static int temp_limits[3] = { 55000, 60000, 65000 };
+#define TEMP_LIMIT0_DEFAULT 55000
+#define TEMP_LIMIT1_DEFAULT 60000
+#define TEMP_LIMIT2_DEFAULT 65000
+
+#define HYSTERESIS_DEFAULT 3000
+
+#define SPEED_ON_AC_DEFAULT 2
+
+static int temp_limits[3] = {
+ TEMP_LIMIT0_DEFAULT, TEMP_LIMIT1_DEFAULT, TEMP_LIMIT2_DEFAULT,
+};
module_param_array(temp_limits, int, NULL, 0444);
MODULE_PARM_DESC(temp_limits,
"Millicelsius values above which the fan speed increases");

-static int hysteresis = 3000;
+static int hysteresis = HYSTERESIS_DEFAULT;
module_param(hysteresis, int, 0444);
MODULE_PARM_DESC(hysteresis,
"Hysteresis in millicelsius before lowering the fan speed");

-static int speed_on_ac = 2;
+static int speed_on_ac = SPEED_ON_AC_DEFAULT;
module_param(speed_on_ac, int, 0444);
MODULE_PARM_DESC(speed_on_ac,
"minimum fan speed to allow when system is powered by AC");
@@ -120,18 +130,21 @@ static int gpd_pocket_fan_probe(struct p
if (temp_limits[i] < 40000 || temp_limits[i] > 70000) {
dev_err(&pdev->dev, "Invalid temp-limit %d (must be between 40000 and 70000)\n",
temp_limits[i]);
- return -EINVAL;
+ temp_limits[0] = TEMP_LIMIT0_DEFAULT;
+ temp_limits[1] = TEMP_LIMIT1_DEFAULT;
+ temp_limits[2] = TEMP_LIMIT2_DEFAULT;
+ break;
}
}
if (hysteresis < 1000 || hysteresis > 10000) {
dev_err(&pdev->dev, "Invalid hysteresis %d (must be between 1000 and 10000)\n",
hysteresis);
- return -EINVAL;
+ hysteresis = HYSTERESIS_DEFAULT;
}
if (speed_on_ac < 0 || speed_on_ac > MAX_SPEED) {
dev_err(&pdev->dev, "Invalid speed_on_ac %d (must be between 0 and 3)\n",
speed_on_ac);
- return -EINVAL;
+ speed_on_ac = SPEED_ON_AC_DEFAULT;
}

fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL);

\
 
 \ /
  Last update: 2020-01-17 00:23    [W:0.541 / U:0.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site