lkml.org 
[lkml]   [2020]   [Jan]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
SubjectRe: [PATCH bpf-next v3 09/11] selftests: Remove tools/lib/bpf from include path
On Thu, Jan 16, 2020 at 5:28 AM Toke Høiland-Jørgensen <toke@redhat.com> wrote:
>
> From: Toke Høiland-Jørgensen <toke@redhat.com>
>
> To make sure no new files are introduced that doesn't include the bpf/
> prefix in its #include, remove tools/lib/bpf from the include path
> entirely.
>
> Instead, we introduce a new header files directory under the scratch tools/
> dir, and add a rule to run the 'install_headers' rule from libbpf to have a
> full set of consistent libbpf headers in $(OUTPUT)/tools/include/bpf, and
> then use $(OUTPUT)/tools/include as the include path for selftests.
>
> For consistency we also make sure we put all the scratch build files from
> other bpftool and libbpf into tools/build/, so everything stays within
> selftests/.
>
> Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
> ---
> tools/testing/selftests/bpf/.gitignore | 1 +
> tools/testing/selftests/bpf/Makefile | 50 +++++++++++++++++++-------------
> 2 files changed, 31 insertions(+), 20 deletions(-)
>
> diff --git a/tools/testing/selftests/bpf/.gitignore b/tools/testing/selftests/bpf/.gitignore
> index 1d14e3ab70be..849be9990ad2 100644
> --- a/tools/testing/selftests/bpf/.gitignore
> +++ b/tools/testing/selftests/bpf/.gitignore
> @@ -40,3 +40,4 @@ test_cpp
> /bpf_gcc
> /tools
> bpf_helper_defs.h
> +/include/bpf

Isn't the real path (within selftests/bpf) a tools/include/bpf, which
is already ignored through /tools rule?

> diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
> index 1fd7da49bd56..c3fa695bb028 100644
> --- a/tools/testing/selftests/bpf/Makefile
> +++ b/tools/testing/selftests/bpf/Makefile
> @@ -20,8 +20,8 @@ CLANG ?= clang
> LLC ?= llc
> LLVM_OBJCOPY ?= llvm-objcopy
> BPF_GCC ?= $(shell command -v bpf-gcc;)
> -CFLAGS += -g -Wall -O2 $(GENFLAGS) -I$(CURDIR) -I$(APIDIR) -I$(LIBDIR) \
> - -I$(BPFDIR) -I$(GENDIR) -I$(TOOLSINCDIR) \
> +CFLAGS += -g -Wall -O2 $(GENFLAGS) -I$(CURDIR) -I$(APIDIR) \
> + -I$(INCLUDE_DIR) -I$(GENDIR) -I$(LIBDIR) -I$(TOOLSINCDIR) \
> -Dbpf_prog_load=bpf_prog_test_load \
> -Dbpf_load_program=bpf_test_load_program
> LDLIBS += -lcap -lelf -lz -lrt -lpthread
> @@ -97,11 +97,15 @@ OVERRIDE_TARGETS := 1
> override define CLEAN
> $(call msg,CLEAN)
> $(RM) -r $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED) $(TEST_GEN_FILES) $(EXTRA_CLEAN)
> - $(MAKE) -C $(BPFDIR) OUTPUT=$(OUTPUT)/ clean
> endef
>
> include ../lib.mk
>
> +SCRATCH_DIR := $(OUTPUT)/tools
> +BUILD_DIR := $(SCRATCH_DIR)/build
> +INCLUDE_DIR := $(SCRATCH_DIR)/include
> +INCLUDE_BPF := $(INCLUDE_DIR)/bpf/bpf.h
> +
> # Define simple and short `make test_progs`, `make test_sysctl`, etc targets
> # to build individual tests.
> # NOTE: Semicolon at the end is critical to override lib.mk's default static
> @@ -120,7 +124,7 @@ $(OUTPUT)/urandom_read: urandom_read.c
> $(call msg,BINARY,,$@)
> $(CC) -o $@ $< -Wl,--build-id
>
> -$(OUTPUT)/test_stub.o: test_stub.c
> +$(OUTPUT)/test_stub.o: test_stub.c $(INCLUDE_BPF)
> $(call msg,CC,,$@)
> $(CC) -c $(CFLAGS) -o $@ $<
>
> @@ -129,7 +133,7 @@ $(OUTPUT)/runqslower: force
> $(Q)$(MAKE) $(submake_extras) -C $(TOOLSDIR)/bpf/runqslower \
> OUTPUT=$(CURDIR)/tools/ VMLINUX_BTF=$(abspath ../../../../vmlinux)
>
> -BPFOBJ := $(OUTPUT)/libbpf.a
> +BPFOBJ := $(BUILD_DIR)/libbpf/libbpf.a
>
> $(TEST_GEN_PROGS) $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/test_stub.o $(BPFOBJ)
>
> @@ -155,17 +159,23 @@ force:
> DEFAULT_BPFTOOL := $(OUTPUT)/tools/sbin/bpftool
> BPFTOOL ?= $(DEFAULT_BPFTOOL)
>
> -$(DEFAULT_BPFTOOL): force
> - $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \
> +$(BUILD_DIR)/libbpf $(BUILD_DIR)/bpftool $(INCLUDE_DIR):
> + $(call msg,MKDIR,,$@)
> + mkdir -p $@
> +
> +$(DEFAULT_BPFTOOL): force $(BUILD_DIR)/bpftool

directories should be included as order-only dependencies (after | )

> + $(Q)$(MAKE) $(submake_extras) -C $(BPFTOOLDIR) \
> + OUTPUT=$(BUILD_DIR)/bpftool/ \
> prefix= DESTDIR=$(OUTPUT)/tools/ install
>
> -$(BPFOBJ): force
> - $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) OUTPUT=$(OUTPUT)/
> +$(BPFOBJ): force $(BUILD_DIR)/libbpf

same

> + $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \
> + OUTPUT=$(BUILD_DIR)/libbpf/
>
> -BPF_HELPERS := $(OUTPUT)/bpf_helper_defs.h $(wildcard $(BPFDIR)/bpf_*.h)
> -$(OUTPUT)/bpf_helper_defs.h: $(BPFOBJ)
> - $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) \
> - OUTPUT=$(OUTPUT)/ $(OUTPUT)/bpf_helper_defs.h
> +BPF_HELPERS := $(wildcard $(BPFDIR)/bpf_*.h) $(INCLUDE_BPF)

Shouldn't all BPF_HELPERS come from $(INCLUDE_DIR)/bpf now?

> +$(INCLUDE_BPF): force $(BPFOBJ)

And this can be more properly a $(BPF_HELPERS): force $(BPFOBJ)?

> + $(Q)$(MAKE) $(submake_extras) -C $(BPFDIR) install_headers \
> + OUTPUT=$(BUILD_DIR)/libbpf/ DESTDIR=$(SCRATCH_DIR) prefix=
>
> # Get Clang's default includes on this system, as opposed to those seen by
> # '-target bpf'. This fixes "missing" files on some architectures/distros,
> @@ -185,8 +195,8 @@ MENDIAN=$(if $(IS_LITTLE_ENDIAN),-mlittle-endian,-mbig-endian)
>
> CLANG_SYS_INCLUDES = $(call get_sys_includes,$(CLANG))
> BPF_CFLAGS = -g -D__TARGET_ARCH_$(SRCARCH) $(MENDIAN) \
> - -I$(OUTPUT) -I$(CURDIR) -I$(CURDIR)/include/uapi \
> - -I$(APIDIR) -I$(LIBDIR) -I$(BPFDIR) -I$(abspath $(OUTPUT)/../usr/include)
> + -I$(INCLUDE_DIR) -I$(CURDIR) -I$(CURDIR)/include/uapi \
> + -I$(APIDIR) -I$(abspath $(OUTPUT)/../usr/include)
>
> CLANG_CFLAGS = $(CLANG_SYS_INCLUDES) \
> -Wno-compare-distinct-pointer-types
> @@ -306,7 +316,7 @@ $(TRUNNER_TEST_OBJS): $(TRUNNER_OUTPUT)/%.test.o: \
> $(TRUNNER_EXTRA_HDRS) \
> $(TRUNNER_BPF_OBJS) \
> $(TRUNNER_BPF_SKELS) \
> - $$(BPFOBJ) | $(TRUNNER_OUTPUT)
> + $$(BPFOBJ) $$(INCLUDE_BPF) | $(TRUNNER_OUTPUT)

singling out $(INCLUDE_BPF) looks weird? But I think $(BPFOBJ)
achieves the same effect, so this change can be probably dropped? Same
below.

> $$(call msg,TEST-OBJ,$(TRUNNER_BINARY),$$@)
> cd $$(@D) && $$(CC) $$(CFLAGS) -c $(CURDIR)/$$< $$(LDLIBS) -o $$(@F)
>
> @@ -314,7 +324,7 @@ $(TRUNNER_EXTRA_OBJS): $(TRUNNER_OUTPUT)/%.o: \
> %.c \
> $(TRUNNER_EXTRA_HDRS) \
> $(TRUNNER_TESTS_HDR) \
> - $$(BPFOBJ) | $(TRUNNER_OUTPUT)
> + $$(BPFOBJ) $$(INCLUDE_BPF) | $(TRUNNER_OUTPUT)
> $$(call msg,EXT-OBJ,$(TRUNNER_BINARY),$$@)
> $$(CC) $$(CFLAGS) -c $$< $$(LDLIBS) -o $$@
>
> @@ -326,7 +336,7 @@ ifneq ($2,)
> endif
>
> $(OUTPUT)/$(TRUNNER_BINARY): $(TRUNNER_TEST_OBJS) \
> - $(TRUNNER_EXTRA_OBJS) $$(BPFOBJ) \
> + $(TRUNNER_EXTRA_OBJS) $$(BPFOBJ) $$(INCLUDE_BPF) \
> | $(TRUNNER_BINARY)-extras
> $$(call msg,BINARY,,$$@)
> $$(CC) $$(CFLAGS) $$(filter %.a %.o,$$^) $$(LDLIBS) -o $$@
> @@ -388,7 +398,7 @@ $(OUTPUT)/test_cpp: test_cpp.cpp $(OUTPUT)/test_core_extern.skel.h $(BPFOBJ)
> $(call msg,CXX,,$@)
> $(CXX) $(CFLAGS) $^ $(LDLIBS) -o $@
>
> -EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) \
> +EXTRA_CLEAN := $(TEST_CUSTOM_PROGS) $(SCRATCH_DIR) \
> prog_tests/tests.h map_tests/tests.h verifier/tests.h \
> feature \
> - $(addprefix $(OUTPUT)/,*.o *.skel.h no_alu32 bpf_gcc tools)
> + $(addprefix $(OUTPUT)/,*.o *.skel.h no_alu32 bpf_gcc)
>

\
 
 \ /
  Last update: 2020-01-16 23:43    [W:0.286 / U:0.260 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site