lkml.org 
[lkml]   [2020]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] tpm:tpm_tis_spi: set cs_change = 0 when timesout
Date
From: Wang Hongzhe <wanghongzhe@huawei.com>

when i reach TPM_RETRY, the cs cannot change back to 'high'.
So the TPM chips thinks this communication is not over.
And next times communication cannot be effective because the
communications mixed up with the last time.

Signed-off-by: Wang Hongzhe <wanghongzhe@huawei.com>
---
drivers/char/tpm/tpm_tis_spi.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/char/tpm/tpm_tis_spi.c b/drivers/char/tpm/tpm_tis_spi.c
index d1754fd..27e57bf 100644
--- a/drivers/char/tpm/tpm_tis_spi.c
+++ b/drivers/char/tpm/tpm_tis_spi.c
@@ -66,8 +66,15 @@ static int tpm_tis_spi_flow_control(struct tpm_tis_spi_phy *phy,
break;
}

- if (i == TPM_RETRY)
+ if (i == TPM_RETRY) {
+ spi_xfer->len = 1;
+ spi_xfer->cs_change = 0;
+ spi_message_init(&m);
+ spi_message_add_tail(spi_xfer, &m);
+ if (ret < 0)
+ return ret;
return -ETIMEDOUT;
+ }
}

return 0;
--
1.7.12.4
\
 
 \ /
  Last update: 2020-01-15 07:31    [W:0.028 / U:0.616 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site