lkml.org 
[lkml]   [2020]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v4 4/7] arm64: dts: meson-axg: Add PCIE PHY nodes
Date
Enable both PCIE and shared MIPI/PCIE PHY nodes in order to make PCIE
reliable on AXG SoC.

Signed-off-by: Remi Pommarel <repk@triplefau.lt>
---
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 04803c3bccfa..d5c3885d4b14 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -1104,6 +1104,12 @@ hiubus: bus@ff63c000 {
#size-cells = <2>;
ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;

+ mpphy: phy@0 {
+ compatible = "amlogic,axg-mipi-pcie-phy";
+ reg = <0x0 0x0 0x0 0xc>;
+ #phy-cells = <1>;
+ };
+
sysctrl: system-controller@0 {
compatible = "amlogic,meson-axg-hhi-sysctrl",
"simple-mfd", "syscon";
@@ -1356,6 +1362,13 @@ tdmout_c: audio-controller@580 {
};
};

+ pcie_phy: bus@ff644000 {
+ compatible = "amlogic,axg-pcie-phy";
+ reg = <0x0 0xff644000 0x0 0x1c>;
+ resets = <&reset RESET_PCIE_PHY>;
+ #phy-cells = <0>;
+ };
+
aobus: bus@ff800000 {
compatible = "simple-bus";
reg = <0x0 0xff800000 0x0 0x100000>;
--
2.24.1
\
 
 \ /
  Last update: 2020-01-15 13:24    [W:0.067 / U:8.576 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site