lkml.org 
[lkml]   [2020]   [Jan]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 1/2] dt-bindings: net: bluetooth: add interrupts properties
Date
add interrupts and interrupt-names as optional properties
to support host-wakeup by interrupt properties instead of
host-wakeup-gpios.

Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
---
.../devicetree/bindings/net/broadcom-bluetooth.txt | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
index c44a30dbe43d..dd258674633c 100644
--- a/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-bluetooth.txt
@@ -23,7 +23,9 @@ Optional properties:
- max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
- shutdown-gpios: GPIO specifier, used to enable the BT module
- device-wakeup-gpios: GPIO specifier, used to wakeup the controller
- - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor
+ - host-wakeup-gpios: GPIO specifier, used to wakeup the host processor.
+ deprecated, replaced by interrupts and
+ "host-wakeup" interrupt-names
- clocks: 1 or 2 clocks as defined in clock-names below, in that order
- clock-names: names for clock inputs, matching the clocks given
- "extclk": deprecated, replaced by "txco"
@@ -37,7 +39,8 @@ Optional properties:
- pcm-frame-type: short, long
- pcm-sync-mode: slave, master
- pcm-clock-mode: slave, master
-
+ - interrupts: must be one, used to wakeup the host processor
+ - interrupt-names: must be "host-wakeup"

Example:

--
2.17.1
\
 
 \ /
  Last update: 2020-01-15 11:13    [W:0.074 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site