lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRe: [PATCH v3 4/7] dt-bindings: atmel-usart: remove wildcard
Date


On 14.01.2020 13:17, Alexandre Belloni wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> On 14/01/2020 11:10:14+0000, Claudiu.Beznea@microchip.com wrote:
>>
>>
>> On 14.01.2020 12:42, Alexandre Belloni wrote:
>>> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>>>
>>> On 14/01/2020 12:23:14+0200, Claudiu Beznea wrote:
>>>> Remove chip whildcard and introduce the list of compatibles instead.
>>>>
>>>> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
>>>> ---
>>>> Documentation/devicetree/bindings/mfd/atmel-usart.txt | 7 +++----
>>>> 1 file changed, 3 insertions(+), 4 deletions(-)
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
>>>> index 699fd3c9ace8..778e8310606a 100644
>>>> --- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
>>>> +++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
>>>> @@ -1,10 +1,9 @@
>>>> * Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART)
>>>>
>>>> Required properties for USART:
>>>> -- compatible: Should be "atmel,<chip>-usart" or "atmel,<chip>-dbgu"
>>>> - The compatible <chip> indicated will be the first SoC to support an
>>>> - additional mode or an USART new feature.
>>>> - For the dbgu UART, use "atmel,<chip>-dbgu", "atmel,<chip>-usart"
>>>> +- compatible: Should be one of the following:
>>>> + - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
>>>> + - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
>>>
>>> All the uarts are not dbgus, so this need to be:
>>>
>>> - "atmel,at91rm9200-usart"
>>> - "atmel,at91sam9260-usart"
>>> - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
>>> - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
>>
>> Ok!
>>
>>>
>>> Also, you need to update drivers/soc/atmel/soc.c
>>
>> OK. Did you refer to CIDR, EXID registers? They are at the same offsets as
>> for the old products. So we can rely on old compatible for them. Is this OK?
>>
>
> Then, what is the point of adding microchip,sam9x60-dbgu ?

Different meaning for CIDR register bits. Version is kept on bits 4 to 0
but not documented in public datasheet, so version displayed by
drivers/soc/atmel/soc.c should work.

Thank you,
Claudiu Beznea

>
>
> --
> Alexandre Belloni, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
\
 
 \ /
  Last update: 2020-01-14 15:58    [W:0.043 / U:2.048 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site