lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v4 1/3] hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
On Tue, Jan 14, 2020 at 01:21:57PM +0200, Beniamin Bia wrote:
> ADM1177 is a Hot Swap Controller and Digital Power Monitor with
> Soft Start Pin.
>
> Datasheet:
> Link: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
>
> Signed-off-by: Beniamin Bia <beniamin.bia@analog.com>
> Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Applied.

Thanks,
Guenter

> ---
> Changes in v4:
> -reverse condition in adm1177_write_alert_thr fixed
>
> Documentation/hwmon/adm1177.rst | 36 ++++
> Documentation/hwmon/index.rst | 1 +
> drivers/hwmon/Kconfig | 10 ++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/adm1177.c | 288 ++++++++++++++++++++++++++++++++
> 5 files changed, 336 insertions(+)
> create mode 100644 Documentation/hwmon/adm1177.rst
> create mode 100644 drivers/hwmon/adm1177.c
>
> diff --git a/Documentation/hwmon/adm1177.rst b/Documentation/hwmon/adm1177.rst
> new file mode 100644
> index 000000000000..c81e0b4abd28
> --- /dev/null
> +++ b/Documentation/hwmon/adm1177.rst
> @@ -0,0 +1,36 @@
> +Kernel driver adm1177
> +=====================
> +
> +Supported chips:
> + * Analog Devices ADM1177
> + Prefix: 'adm1177'
> + Datasheet: https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1177.pdf
> +
> +Author: Beniamin Bia <beniamin.bia@analog.com>
> +
> +
> +Description
> +-----------
> +
> +This driver supports hardware monitoring for Analog Devices ADM1177
> +Hot-Swap Controller and Digital Power Monitors with Soft Start Pin.
> +
> +
> +Usage Notes
> +-----------
> +
> +This driver does not auto-detect devices. You will have to instantiate the
> +devices explicitly. Please see Documentation/i2c/instantiating-devices for
> +details.
> +
> +
> +Sysfs entries
> +-------------
> +
> +The following attributes are supported. Current maxim attribute
> +is read-write, all other attributes are read-only.
> +
> +in0_input Measured voltage in microvolts.
> +
> +curr1_input Measured current in microamperes.
> +curr1_max_alarm Overcurrent alarm in microamperes.
> diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
> index 682ef4dda89c..cc7000593a73 100644
> --- a/Documentation/hwmon/index.rst
> +++ b/Documentation/hwmon/index.rst
> @@ -29,6 +29,7 @@ Hardware Monitoring Kernel Drivers
> adm1025
> adm1026
> adm1031
> + adm1177
> adm1275
> adm9240
> ads7828
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 7ea61648ad16..47ac20aee06f 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -164,6 +164,16 @@ config SENSORS_ADM1031
> This driver can also be built as a module. If so, the module
> will be called adm1031.
>
> +config SENSORS_ADM1177
> + tristate "Analog Devices ADM1177 and compatibles"
> + depends on I2C
> + help
> + If you say yes here you get support for Analog Devices ADM1177
> + sensor chips.
> +
> + This driver can also be built as a module. If so, the module
> + will be called adm1177.
> +
> config SENSORS_ADM9240
> tristate "Analog Devices ADM9240 and compatibles"
> depends on I2C
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index f0f514f9cf24..613f50987965 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -34,6 +34,7 @@ obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o
> obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o
> obj-$(CONFIG_SENSORS_ADM1029) += adm1029.o
> obj-$(CONFIG_SENSORS_ADM1031) += adm1031.o
> +obj-$(CONFIG_SENSORS_ADM1177) += adm1177.o
> obj-$(CONFIG_SENSORS_ADM9240) += adm9240.o
> obj-$(CONFIG_SENSORS_ADS7828) += ads7828.o
> obj-$(CONFIG_SENSORS_ADS7871) += ads7871.o
> diff --git a/drivers/hwmon/adm1177.c b/drivers/hwmon/adm1177.c
> new file mode 100644
> index 000000000000..d314223a404a
> --- /dev/null
> +++ b/drivers/hwmon/adm1177.c
> @@ -0,0 +1,288 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * ADM1177 Hot Swap Controller and Digital Power Monitor with Soft Start Pin
> + *
> + * Copyright 2015-2019 Analog Devices Inc.
> + */
> +
> +#include <linux/bits.h>
> +#include <linux/device.h>
> +#include <linux/hwmon.h>
> +#include <linux/i2c.h>
> +#include <linux/init.h>
> +#include <linux/module.h>
> +#include <linux/regulator/consumer.h>
> +
> +/* Command Byte Operations */
> +#define ADM1177_CMD_V_CONT BIT(0)
> +#define ADM1177_CMD_I_CONT BIT(2)
> +#define ADM1177_CMD_VRANGE BIT(4)
> +
> +/* Extended Register */
> +#define ADM1177_REG_ALERT_TH 2
> +
> +#define ADM1177_BITS 12
> +
> +/**
> + * struct adm1177_state - driver instance specific data
> + * @client pointer to i2c client
> + * @reg regulator info for the the power supply of the device
> + * @r_sense_uohm current sense resistor value
> + * @alert_threshold_ua current limit for shutdown
> + * @vrange_high internal voltage divider
> + */
> +struct adm1177_state {
> + struct i2c_client *client;
> + struct regulator *reg;
> + u32 r_sense_uohm;
> + u32 alert_threshold_ua;
> + bool vrange_high;
> +};
> +
> +static int adm1177_read_raw(struct adm1177_state *st, u8 num, u8 *data)
> +{
> + return i2c_master_recv(st->client, data, num);
> +}
> +
> +static int adm1177_write_cmd(struct adm1177_state *st, u8 cmd)
> +{
> + return i2c_smbus_write_byte(st->client, cmd);
> +}
> +
> +static int adm1177_write_alert_thr(struct adm1177_state *st,
> + u32 alert_threshold_ua)
> +{
> + u64 val;
> + int ret;
> +
> + val = 0xFFULL * alert_threshold_ua * st->r_sense_uohm;
> + val = div_u64(val, 105840000U);
> + val = div_u64(val, 1000U);
> + if (val > 0xFF)
> + val = 0xFF;
> +
> + ret = i2c_smbus_write_byte_data(st->client, ADM1177_REG_ALERT_TH,
> + val);
> + if (ret)
> + return ret;
> +
> + st->alert_threshold_ua = alert_threshold_ua;
> + return 0;
> +}
> +
> +static int adm1177_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + struct adm1177_state *st = dev_get_drvdata(dev);
> + u8 data[3];
> + long dummy;
> + int ret;
> +
> + switch (type) {
> + case hwmon_curr:
> + switch (attr) {
> + case hwmon_curr_input:
> + ret = adm1177_read_raw(st, 3, data);
> + if (ret < 0)
> + return ret;
> + dummy = (data[1] << 4) | (data[2] & 0xF);
> + /*
> + * convert to milliamperes
> + * ((105.84mV / 4096) x raw) / senseResistor(ohm)
> + */
> + *val = div_u64((105840000ull * dummy),
> + 4096 * st->r_sense_uohm);
> + return 0;
> + case hwmon_curr_max_alarm:
> + *val = st->alert_threshold_ua;
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> + case hwmon_in:
> + ret = adm1177_read_raw(st, 3, data);
> + if (ret < 0)
> + return ret;
> + dummy = (data[0] << 4) | (data[2] >> 4);
> + /*
> + * convert to millivolts based on resistor devision
> + * (V_fullscale / 4096) * raw
> + */
> + if (st->vrange_high)
> + dummy *= 26350;
> + else
> + dummy *= 6650;
> +
> + *val = DIV_ROUND_CLOSEST(dummy, 4096);
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static int adm1177_write(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long val)
> +{
> + struct adm1177_state *st = dev_get_drvdata(dev);
> +
> + switch (type) {
> + case hwmon_curr:
> + switch (attr) {
> + case hwmon_curr_max_alarm:
> + adm1177_write_alert_thr(st, val);
> + return 0;
> + default:
> + return -EOPNOTSUPP;
> + }
> + default:
> + return -EOPNOTSUPP;
> + }
> +}
> +
> +static umode_t adm1177_is_visible(const void *data,
> + enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + const struct adm1177_state *st = data;
> +
> + switch (type) {
> + case hwmon_in:
> + switch (attr) {
> + case hwmon_in_input:
> + return 0444;
> + }
> + break;
> + case hwmon_curr:
> + switch (attr) {
> + case hwmon_curr_input:
> + if (st->r_sense_uohm)
> + return 0444;
> + return 0;
> + case hwmon_curr_max_alarm:
> + if (st->r_sense_uohm)
> + return 0644;
> + return 0;
> + }
> + break;
> + default:
> + break;
> + }
> + return 0;
> +}
> +
> +static const struct hwmon_channel_info *adm1177_info[] = {
> + HWMON_CHANNEL_INFO(curr,
> + HWMON_C_INPUT | HWMON_C_MAX_ALARM),
> + HWMON_CHANNEL_INFO(in,
> + HWMON_I_INPUT),
> + NULL
> +};
> +
> +static const struct hwmon_ops adm1177_hwmon_ops = {
> + .is_visible = adm1177_is_visible,
> + .read = adm1177_read,
> + .write = adm1177_write,
> +};
> +
> +static const struct hwmon_chip_info adm1177_chip_info = {
> + .ops = &adm1177_hwmon_ops,
> + .info = adm1177_info,
> +};
> +
> +static void adm1177_remove(void *data)
> +{
> + struct adm1177_state *st = data;
> +
> + regulator_disable(st->reg);
> +}
> +
> +static int adm1177_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct device *dev = &client->dev;
> + struct device *hwmon_dev;
> + struct adm1177_state *st;
> + u32 alert_threshold_ua;
> + int ret;
> +
> + st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
> + if (!st)
> + return -ENOMEM;
> +
> + st->client = client;
> +
> + st->reg = devm_regulator_get_optional(&client->dev, "vref");
> + if (IS_ERR(st->reg)) {
> + if (PTR_ERR(st->reg) == -EPROBE_DEFER)
> + return -EPROBE_DEFER;
> +
> + st->reg = NULL;
> + } else {
> + ret = regulator_enable(st->reg);
> + if (ret)
> + return ret;
> + ret = devm_add_action_or_reset(&client->dev, adm1177_remove,
> + st);
> + if (ret)
> + return ret;
> + }
> +
> + if (device_property_read_u32(dev, "shunt-resistor-micro-ohms",
> + &st->r_sense_uohm))
> + st->r_sense_uohm = 0;
> + if (device_property_read_u32(dev, "adi,shutdown-threshold-microamp",
> + &alert_threshold_ua)) {
> + if (st->r_sense_uohm)
> + /*
> + * set maximum default value from datasheet based on
> + * shunt-resistor
> + */
> + alert_threshold_ua = div_u64(105840000000,
> + st->r_sense_uohm);
> + else
> + alert_threshold_ua = 0;
> + }
> + st->vrange_high = device_property_read_bool(dev,
> + "adi,vrange-high-enable");
> + if (alert_threshold_ua && st->r_sense_uohm)
> + adm1177_write_alert_thr(st, alert_threshold_ua);
> +
> + ret = adm1177_write_cmd(st, ADM1177_CMD_V_CONT |
> + ADM1177_CMD_I_CONT |
> + (st->vrange_high ? 0 : ADM1177_CMD_VRANGE));
> + if (ret)
> + return ret;
> +
> + hwmon_dev =
> + devm_hwmon_device_register_with_info(dev, client->name, st,
> + &adm1177_chip_info, NULL);
> + return PTR_ERR_OR_ZERO(hwmon_dev);
> +}
> +
> +static const struct i2c_device_id adm1177_id[] = {
> + {"adm1177", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, adm1177_id);
> +
> +static const struct of_device_id adm1177_dt_ids[] = {
> + { .compatible = "adi,adm1177" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, adm1177_dt_ids);
> +
> +static struct i2c_driver adm1177_driver = {
> + .class = I2C_CLASS_HWMON,
> + .driver = {
> + .name = "adm1177",
> + .of_match_table = adm1177_dt_ids,
> + },
> + .probe = adm1177_probe,
> + .id_table = adm1177_id,
> +};
> +module_i2c_driver(adm1177_driver);
> +
> +MODULE_AUTHOR("Beniamin Bia <beniamin.bia@analog.com>");
> +MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
> +MODULE_DESCRIPTION("Analog Devices ADM1177 ADC driver");
> +MODULE_LICENSE("GPL v2");

\
 
 \ /
  Last update: 2020-01-14 15:13    [W:0.047 / U:67.424 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site