lkml.org 
[lkml]   [2020]   [Jan]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH V4 1/4] arm64: dts: sc7180: Add Venus video codec DT node
Date
This adds Venus video codec DT node for sc7180.

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 36 ++++++++++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3676bfd..6ecacca 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -10,6 +10,7 @@
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/phy/phy-qcom-qusb2.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
+#include <dt-bindings/clock/qcom,videocc-sc7180.h>

/ {
interrupt-parent = <&intc>;
@@ -66,6 +67,11 @@
compatible = "qcom,cmd-db";
no-map;
};
+
+ venus_mem: memory@8f600000 {
+ reg = <0 0x8f600000 0 0x500000>;
+ no-map;
+ };
};

cpus {
@@ -1043,6 +1049,36 @@
};
};

+ venus: video-codec@aa00000 {
+ compatible = "qcom,sc7180-venus";
+ reg = <0 0x0aa00000 0 0xff000>;
+ interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&videocc VENUS_GDSC>,
+ <&videocc VCODEC0_GDSC>;
+ power-domain-names = "venus", "vcodec0";
+ clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+ <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+ <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+ <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+ clock-names = "core", "iface", "bus",
+ "vcodec0_core", "vcodec0_bus";
+ iommus = <&apps_smmu 0x0c00 0x60>;
+ memory-region = <&venus_mem>;
+
+ interconnects = <&mmss_noc MASTER_VIDEO_P0 &mc_virt SLAVE_EBI1>,
+ <&gem_noc MASTER_APPSS_PROC &config_noc SLAVE_VENUS_CFG>;
+ interconnect-names = "video-mem", "cpu-cfg";
+
+ video-decoder {
+ compatible = "venus-decoder";
+ };
+
+ video-encoder {
+ compatible = "venus-encoder";
+ };
+ };
+
pdc: interrupt-controller@b220000 {
compatible = "qcom,sc7180-pdc", "qcom,pdc";
reg = <0 0x0b220000 0 0x30000>;
--
1.9.1
\
 
 \ /
  Last update: 2020-01-14 13:55    [W:0.053 / U:8.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site